Sökresultat

To establish pressures using a DWT or piston gauge, you need to account for the acceleration of gravity where the instrument is operated. Learn more.

You’ll want to test thermocouples at regular calibration intervals & if you suspect them of failing to meet performance specifications. Learn how here.

A typical 3-point calibration of 4 tri-clamp sanitary sensors takes over 4 hours (259.45 minutes) using a 7103 Micro-Bath. The same calibration using a 7109A Portable Calibration Bath takes about 2 hours (130.0 minutes). That’s a time savings of more than 2 hours per 4-sensor batch!

EN 50191, Electrical Safety Testing Standard for the Erection and Operation of Electrical Test Equipment

See the benefits of upgrading the GE Druck PACE 6000 to the Fluke 6270A & learn steps for configuring and installing the 6270A. Get the details here.

This application note summarizes some of the benefits of upgrading to the 6270A, as well as detailing the steps for configuring and installing the 6270A as a replacement to the PACE 5000.

How do you choose a multi-product electrical calibrator? They are not all the same. Read this short blog post to learn seven essential points to consider.

If you’re in the market for an isothermal bath (temperature calibration bath), you may have already noticed that many suppliers provide technical specifications that are confusing or incomplete. Read this short article to learn 4 key specifications to review to help make the best decision and avoid a mistake.

This Resource Center is designed to help you easily see which Fluke Calibration pressure controller is the recommended replacement for your existing older controller.

Read this short blog post to see how Fluke Calibration contributes in this year's World Metrology Day theme, “Measurements and Light”.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Having the latest version of MET/CAL software gives you access to many new features and functions. Here are just a few examples of the additional capabilities added with each new update.

It's obsolete and the manufacturer doesn't support it anymore.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Why calibrate test equipment? What makes it go out of cal? What happens when you send equipment for calibration? When should you calibrate? Learn here.

Fluke Calibration manufactures platinum resistance thermometers, thermocouples, thermistor temperature sensors for precision temperature measurement and calibration

A temperature calibrator, often called a thermometer calibrator, is used to remove inaccuracies in installed thermometers and temperature sensors, because temperature measurement is a critical parameter in many industrial processes.

A platinum resistance thermometer (PRT) is a thermometer constructed from a high purity platinum element (wire-wound coil or thin film) placed in a tube of metal or glass and sealed with an inert atmosphere and/or mineral insulator.

Fluke Calibration manufactures leading primary temperature standards including ITS-90 SPRTs, ITS-90 fixed point cells, water triple point cells, & maintenance apparatus. Learn more.

Precision thermometer readout from Fluke Calibration is easy to use, very accurate, and designed for calibration. Contact us today for more information.

Installing MET/TEMP IICan MET/TEMP II be installed on computers running Windows® Vista?When I install MET/TEMP II, I am prompted to enter a serial number. Where do I find my serial number?I downloaded MET/TEMP II from the internet and installed the demo version. Now I want to buy it and start using it. What do I need to do?I am currently a Fluke MET/TEMP software user. What do I need to know about upgrading to MET/TEMP II?I am currently a Calibrate-it and Generate-it user. What do I need to know...

The demo version comes with a demo license that allows up to two concurrent clients to connect

MET/TEMP II is intended to replace Fluke's MET/TEMP software. MET/TEMP II is a completely different software package than MET/TEMP

Most calibration procedures require comparison of the device under test (DUT) and calibration standard at multiple pressure points across the DUT’s range.

Quick Links-Download Demos, Updates, Service Releases, etc.Technical SupportQuestions about Fluke Calibration Temperature software? This page answers some of the most common questions concerning our software products.All Fluke Calibration temperature calibration software:Q. What version of Windows® is required to run Fluke Calibration Temperature software?A. Please refer to the table below for Windows® compatibility information for the latest version of each software indicated: Software \ Windows®98/98SENT4...

A40 / A40A current shunt from Fluke Calibration enables ac / dc current transfer measurements & operates in the frequency range of 5Hz to 100Khz. Get a quote.

525B temperature/pressure calibrator is the most accurate Fluke Calibration temperature calibrator & also provides high accuracy for pressure calibration.

Med nyare teknik kan du lättare uppfylla kraven, samla in mer exakta data och öka säkerheten. De viktigaste skälen till att uppgradera nu.

MET/TEMP II Software Download (.exe)TITLEVERLinksMET/TEMP II5.2Product PageDescriptionWhen downloaded, this file can be run to install MET/TEMP II. There is no free demo/trial version of 5.2. In order to install MET/TEMP II v5.2, you must purchase the software and obtain a serial number. The installation process prompts you to enter the serial number. Version 5.2 does not accept serial numbers from previous versions of MET/TEMP II. The serial number will be located on a sticker on the CD pouch....

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)Documents:MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/TEAM 3.1.1 Readme (.pdf)Update Instructions for MET/TEAM 3.1.1 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You...

MET/TEAM version 2.2 (with MET/CAL version 9.1) (.iso)Documents:MET/CAL 9.1.0 Readme (.pdf)MET/TEAM 2.2.0 Readme (.pdf)Updating to MET/TEAM 2.2 and MET/CAL 9.1 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThere has been a major change to the MET/TEAM database which means updating to version 2.2 is a multistep process that could take from 8 to 24 hours depending on your database, server configuration, and network environment.There has been a major change to MET/CAL regarding...

Update: MET/CAL version 10.6.2 for MET/TEAM version 3.2.0 (.zip)Documents:Accuracy Files for Fluke 5540A, 5550A, and 5560A (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers:MET/CAL version 10.6.2 release is an update to previous MET/CAL software. This update includes new Instrument FSCs for the Fluke 5560A, 5550A, and 5540A calibrators and bug fixes.Do not manually uninstall the previous version. If you do this...

Update: MET/CAL version 10.6.2 for MET/CONNECT version 2.1.0 (.zip)Documents:Accuracy Files for Fluke 5540A, 5550A, and 5560A (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available here.Current MET/CONNECT Customers:MET/CAL version 10.6.2 release is an update to previous MET/CAL software. This update includes new Instrument FSCs for the Fluke 5560A, 5550A, and 5540A calibrators and bug fixes.Do not manually uninstall the previous version. If you do this...

Update: MET/CAL version 10.6.1 for MET/TEAM version 3.2.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers:MET/CAL version 10.6.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime...

Update: MET/CAL version 10.6.1 for MET/CONNECT version 2.1.0 (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available here.Current MET/CONNECT Customers:MET/CAL version 10.6.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime...

Update: MET/CAL version 10.5.1 for MET/TEAM version 3.1.1 or 3.1.0 (.zip)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers:MET/CAL version 10.5.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime and/or MET/CAL Editor on any workstations, be...

Update: MET/CAL version 10.5.0 for MET/CONNECT version 2.0.0 (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available with the MET/TEAM 3.1.0 installer.Current MET/CONNECT Customers:MET/CAL version 10.5.0 release is an update to previous MET/CAL software. This update includes new features, bug fixes, and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and...

Update: MET/CAL version 10.4.0 for MET/TEAM version 3.0.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available with the MET/CONNECT 2.0.0 installer.Current MET/TEAM Customers:MET/CAL version 10.4.0 release is an update to previous MET/CAL software. This update includes new features, bug fixes, and minor updates.You must install MET/TEAM version 3.0.0 Hot Fix 2 to use MET/CAL 10.4.0.Do not manually uninstall the previous version. If you do this...

Update: MET/CAL version 10.2.2 for MET/TEAM version 3.0.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available with the MET/CONNECT 1.2.0 installer.Current MET/TEAM Customers:MET/CAL version 10.2.2 release is an update to previous MET/CAL software. This update includes bug fixes and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you...

RPM3 v1.02j Embedded Software (.bin)TITLEVERUSE WITHRPM3™1.02j2005.06.27RPM3Instructions:Do Not use with HGC-30000-AF!Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires...

Release: MET/TEAM version 3.3.0 (with MET/CAL version 11.0.0) (.iso)Documents:MET/TEAM 3.3.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/CAL 11.0.0 Read Me (.pdf)Updating to METTEAM 3.3.0 and METCAL 11.0.0 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.3.0 release is a minor update to MET/TEAM software. The MET/CAL version 11.0.0 release is a major update to MET/CAL software. This update includes new features, improvements, bug fixes, and minor...

Release: MET/TEAM version 3.2.0 (with MET/CAL version 10.6.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.2.0 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from version 3.0.0, 3.1.0, or 3.1.1 directly to version 3.2.0.Upgrading from version 3.x.x of MET/TEAM will not require you to re-request your licenses.Upgrading...

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from either version 3.0.0 or 3.1.0 directly to version 3.1.1.Upgrading from version 3.0.0 or 3.1.0 of MET/TEAM will not require you to re-request your...

Release: MET/TEAM version 3.1.0 (with MET/CAL version 10.5.0) (.iso)Documents:MET/TEAM 3.1.0 Readme (.pdf)MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)Update Instructions for MET/TEAM 3.1.0 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.0 and MET/CAL version 10.5.0 release is a a major update to MET/TEAM and...

MS-PSWD is a service that MET/CAL, MET/TEAM, or 5500/CAL customers can purchase to get their systems password reestablished.

molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

molbox RFM™ v1.20d Embedded Software (.bin)TITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMTITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of...

IR Configuration Utility v1.0 (.exe)IR Configuration Utility v1.0Posted: 01/23/2009Description: The IR Configuration Utility is shipped with supported instruments. Supported instruments include the 4180 and 4181 Precision IR Calibrators.This software is free and does not require a serial number to be installed.Size: 13.9MB

IO Toolkit v1.0 (.exe)IO Toolkit (Model 9940)IO Toolkit v1.0Posted: 09/26/2008Description: The IO Toolkit is shipped with supported instruments. This version includes support for the new 1523 and 1524 series Readouts.This software is free and does not require a serial number to be installed.Size: 7.0MB

Interface-it v3.81 (.exe)Interface-it Temperature Calibration SoftwarePosted: 11/27/2007Description: This version includes drivers for the new 914x series Field Metrology Wells as well as 917x series Metrology Wells.Size: 2.2MB** INTERFACE-IT MAY NOT BE FULLY COMPATIBLE WITH WINDOWS® VISTA  & WINDOWS® 7 **Fluke Calibrations's Interface-it Software Version 3.81 allows nearly all our dry-wells, baths and controllers that are equipped with an RS-232 interface to be controlled remotely from a...

Download COMPASS® for PressureVersion 3 Releases3.00.43 (SP1) (2011.02.11)ADDCP-802Support PG7000 and PG9000 models that respond with FLUKE as the manufacturer.CHGCP-793An automated PG7000/PG9000 system with a PPC and AMH will use ATM as the minimum pressure when exercising in a test that is run in Absolute by ATM.3.00.42 (SP1) (2010.07.07)ADDCP-689Support alternate units of measure and temperature references for the Piston Cylinder effective area.ADDCP-775Added new instruments to the default database.CHGCP-786When...

CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

6270A Embedded Software, Update by USB (.zip)Additional Downloads:6270 PCM v104 USB (.zip)Click here to update by serial RS-232 port.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 6270AUpdating the PCM (Pressure...

6270A Embedded Software, Update by Serial RS-232 Port (.zip)Click here to update by USB.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the RS-232 serial port on the rear panel of the 6270AThe below procedure updates the main firmware. Updating...

Get step-by-step instructions on how to accurately calibrate a hygrometer or other humidity sensor including why it’s important, techniques, and tips.

To minimize plant downtime and keep operations up and running, follow this guidance to ensure smooth instrumentation calibration.

If you are purchasing a calibrator to calibrate pressure measurement devices, follow these 2 simple steps to ensure you get what you need.

There are a few instruments used to perform infrared (IR) thermometer and IR imager calibration. These instruments fall into two categories, cavities and flat-plates. To calculate the uncertainty in using these instruments, the temperature uniformity must be known. This is especially true with flat-plates. This uncertainty may be given in an instrument’s specification. However, there is not a standardized test method to test the uniformity of a flat-plate calibrator as there is with other classes...

Eftersom solcellsmatriser åldras finns det många möjliga orsaker till att systemet inte fungerar så bra. Vissa kan förväntas, såsom nedsmutsningsförluster eller nedbrytning av matrissystemet på längre sikt. Vissa kan vara oväntade, t.ex. fel på förbikopplingsdiod, spruckna moduler osv. Eftersom analysatorer med spårning av ström/spänning-kurvor registrerar alla ström- och spänningsdriftpunkter för en solcellskälla har de en unik förmåga att identifiera symtom på otillräckliga...

Du måste känna till planet för matrisens solinstrålning och celltemperatur för att utvärdera solcellskretsens prestanda, oavsett testmetod. För att säkerställa att du kan tolka ström/spänning-kurvor med noggrannhet bör du vara uppmärksam på miljöförhållanden, eftersom snabba förändringar av solinstrålning eller celltemperatur kan orsaka fel i dina ström/spänning-kurvtester. Rätt sensortyper och testmetoder, som Flukes Solmetric PVA 1500 analysator med spårning av ström/spänning-kurvor,...

.super-custom html { font-family: sans-serif; -ms-text-size-adjust: 100%; -webkit-text-size-adjust: 100%; font-size: 10px; -webkit-tap-highlight-color: transparent } .super-custom body { font-family: "Helvetica Neue",Helvetica,Arial,sans-serif;font-size:14px;line-height:1.42857143;color:#333;background-color:#fff;margin:0}.super-custom article, .super-custom aside, .super-custom details, .super-custom figcaption, .super-custom figure, .super-custom footer, .super-custom header, .super-custom hgroup,...

För att analysera ström/spänning-kurvor i solcellssystem använder du en solcellsanalysator med spårning av ström/spänning-kurvor för att jämföra uppmätta kurvor mot standardmässiga eller förväntade kurvor, med hänsyn till miljöpåverkan som skuggning eller temperatur. ”Flödesschemat för felsökning av solcellsmatris” är en omfattande guide som har utvecklats utifrån omfattande erfarenhet av fältarbete, granskningar av litteratur om solcellsmodulers tillförlitlighet och...

Komplett lösning för säkerhets- och prestandatest av laddningsstationer för växelströmselfordon

Transportbandsunderhåll måste vara effektivt för att undvika dyra och oplanerade driftstopp. Det är särskilt viktigt i branscher som livsmedels- och dryckestillverkning, logistiklager, fordonstillverkning, gruvdrift och råvarumaterialhantering. Precisionsakustikkameran Fluke ii910 med MecQ™-läge är en modern lösning. Den kan användas till att identifiera potentiella problem i transportbandssystem innan problemen förvärras så att du kan vidta förebyggande åtgärder och maximera systemprestanda....

Provkabeltillbehörssats för kabel- och kretsspårning och felsökning.

Lär dig mer om värmekameror för bostads- och byggnadsinspektioner. Hitta den bästa värmekameran för HVAC.

Strömtången Fluke 393 FC med klassificeringen CAT III/1 500 V/CAT IV/600 V för CAT III-miljöer är ett oumbärligt verktyg för installation, övervakning och test av solcellssystem i solenergiinstallationer.

Vem uppfann multimetern? Från galvanometrar och voltmetrar till digitala multimetrar med värmefotografering och trådlösa funktioner. Flukes historia av multimetermodeller.

Test och övervakning av partiell urladdning med hjälp av en Fluke ii910-kamera för akustisk avbildning. Läs om hur du testar partiell urladdning.

Definition av partiell urladdning. Lär dig hur partiell urladdning inträffar, orsaker till partiell urladdning och fyra huvudtyper av partiell urladdning.

Maximera dina pneumatiska verktygsprestanda med Fluke ii900 Acoustic Imaging Camera. Diagnostisera tryckfalls- och luftflödesproblem i tryckluftsledningar snabbt och enkelt.

Tryckluft är livsmedels- och dryckesindustrins fjärde nödvändighet, efter vatten, elektricitet och naturgas. Tillförlitligheten hos denna hänger på ett förutsägbart lufttryck, vilket innebär att även små läckor kan leda till stora kostnader. Här är en titt på luftläckage som ofta förekommer i livsmedels- och dryckesindustrin, tillsammans med bästa praxis och tekniker för att hantera dem. Fluke ii900 Industrial Acoustic Imager innehåller teknik som tillför en visuell komponent...

Se skillnaderna mellan Fluke ii900 och ii910 Acoustic Imager-kameror med avseende på specifikationer och funktioner.

Det är mycket viktigt att du följer elsäkerhetsregler i industrianläggningar. Det finns många myter om elsäkerhet. Förstå vad som är fakta och vad som är myt vid arbete i strömförande system.

The 9144 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

The 9143 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

The 1502A and 1504 reference thermometers will read RTDs, PRDs, and thermistor sensors. Primary temperature standards, secondary temperature standards, fixed-point cells, water triple points, SPRTs, calibration baths, dry-block calibrators and temperature metrology training can also be found on this site.

The DewK measures temperature to ±0.125 °C and humidity to ±1.5% on two channels, and displays it on a big, clear screen.

Fluke Ti400 är perfekt för proffs tack vare högpresterande funktioner, såsom LaserSharp® autofokus. Upptäck hastigheten och noggrannheten hos denna spjutspetskamera i dag.

Fluke Ti300 levereras komplett med LaserSharp® autofokus och en robust design, byggd för att klara alla miljöer. Håll dig i framkant med denna IR-kamera från Fluke.

The 9142 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

Ett företags största investering är inte utrustningen bakom luckan till elcentralen – det som har högsta prioritet är att erbjuda det ultimata skyddet för elektriker, ingenjörer och inspektörer som riskerar livet på jobbet varje dag.

CNX C3003 moduluppbyggd mjuk väska med 3 fack är lika mångsidig som CNX-gruppens trådlösa testverktyg. Den här väskan innehåller tre justerbara fack som lämpar sig för CNX trådlös multimeter eller någon av CNX-modulerna för fjärrmätningar. En innerficka rymmer testkablar och andra tillbehör.

CNX C3002 moduluppbyggd DMM mjuk väska med 2 fack är lika mångsidig som CNX-gruppens trådlösa testverktyg. Den här väskan kan fungera fristående för CNX trådlös multimeter och testkablar eller anslutas till CNX C3000 premium moduluppbyggd verktygsväska. Dina CNX-verktyg är alltid inom enkelt räckhåll och är klara för testning.

CNX C3001 moduluppbyggd liten skyddsväska är lika mångsidig som CNX-gruppens trådlösa testverktyg. Varje moduluppbyggd liten skyddsväska rymmer en CNX-fjärrmodul och håller den redo för testning på utsidan av CNX C3000 premium moduluppbyggd verktygsväska. Ta bara loss med mjuka skyddsväskan från huvudväskan, anslut proberna och du är klar att testa.

Spänning är trycket från en elektrisk krets strömkälla som pressar laddade elektroner (ström) genom en ledande loop, vilket gör att de utför något, som att få en lampa att tändas.

En diod är en halvledare som i princip fungerar som en enkelriktad brytare för ström.

Beröringsfria verktyg ökar elsäkerheten och hjälper de anställda att undvika skador. Infraröd (IR), laseravstånd, spänningsdetektor, fjärrdisplay, trådlös

Alla som arbetar med elektricitet får snabbt respekt för allt som kan tänkas vara spänningsförande. Men om arbetet sker under tidspress eller om det gäller att få igång viktig utrustning kan även de mest erfarna elektriker göra sig skyldiga till slarv och fel som de inte gör i vanliga fall.

ROI för industriella energieffektivitetsprogram. Så här kan tillverkningsanläggningar identifiera energiförluster, sänka elräkningen och spara in på industriella energikostnader.

Identifiera energiförluster med hjälp av elkvalitetsövervakning och -hantering. Identifiera möjligheter till energibesparingar och förhindra större fel och störningar.

Felsökning av de vanligaste elkvalitetsproblemen – spänningsdistorsion och övertoner. Verktyg som behövs, typer av problem

Fluke Energy Analyze Plus Fluke Energy Analyze Plus programvara för hämtning, analys och rapportering. Används med Fluke 1730, 1732, 1734, 1736, 1738, 1742, 1746 och 1748. Fluke 173x v2.4.1 fil med fast programvara (.bin) Uppdateringsproceduren beror på den version av fast programvara som för tillfället är installerad på instrumentet. För att uppdatera instrument som kör version 2.0, spara den binära filen för fast programvara till katalogen ”Fluke173x” Uppdatera instrumentet 1736...

PowerLog Classic-programvara för Fluke VR1710 (.exe) PowerLog Classic-programvara används med Fluke 345, VR1710, 1735 och 433/434/435. (Kompatibel med Windows Vista, 7, 8 och 10). (01/2016) VR1710 verktyg för uppgradering av fast programvara vA1.34(.zip) (12/2016)

PowerLog Classic Programvara PowerLog Classic programvara används med Fluke 345, VR1710, 1735 och 433/434/435. (Kompatibel med Windows Vista, 7, 8 och 10). 1735 Uppgraderingsverktyg för fast programvara v3.1 (.exe) Uppgradera din Fluke 1735 med den senaste fasta programvaran. (Vista-kompatibel) 1735 fast programvara v1.10 (.zip) Den här filen ska packas upp och användas tillsammans med uppgraderingsverktyget för fast programvara V3.1 (ovan). Senast uppdaterad 08/2014 OBS: v1.10 fast programvara...

Fast programvara till Fluke 805 vibrationsmätare v3.0.5 (.bin) Skapa snabbt mätdons grupper, mätdon och testpunkter med mallen Import i appen Fluke Connect™. Skicka arbetsorder och rutter direkt till 805 FC med mobilappen Fluke Connect™. Konfigurera och redigera maskinprofiler med mobilappen Fluke Connect och skicka dem till 805 FC Associera testresultat automatiskt med maskinprofiler Så här uppgraderar du mätaren: Ladda ned mätarens uppgraderingsfil genom att klicka på länken ovan....

Vibration Software Downloads

Uppgraderingar av digitala multimetrar