Procurar Resultados

To establish pressures using a DWT or piston gauge, you need to account for the acceleration of gravity where the instrument is operated. Learn more.

You’ll want to test thermocouples at regular calibration intervals & if you suspect them of failing to meet performance specifications. Learn how here.

A typical 3-point calibration of 4 tri-clamp sanitary sensors takes over 4 hours (259.45 minutes) using a 7103 Micro-Bath. The same calibration using a 7109A Portable Calibration Bath takes about 2 hours (130.0 minutes). That’s a time savings of more than 2 hours per 4-sensor batch!

EN 50191, Norma de testes de segurança elétrica para montagem e operação de equipamentos de teste elétrico

See the benefits of upgrading the GE Druck PACE 6000 to the Fluke 6270A & learn steps for configuring and installing the 6270A. Get the details here.

This application note summarizes some of the benefits of upgrading to the 6270A, as well as detailing the steps for configuring and installing the 6270A as a replacement to the PACE 5000.

How do you choose a multi-product electrical calibrator? They are not all the same. Read this short blog post to learn seven essential points to consider.

If you’re in the market for an isothermal bath (temperature calibration bath), you may have already noticed that many suppliers provide technical specifications that are confusing or incomplete. Read this short article to learn 4 key specifications to review to help make the best decision and avoid a mistake.

This Resource Center is designed to help you easily see which Fluke Calibration pressure controller is the recommended replacement for your existing older controller.

Read this short blog post to see how Fluke Calibration contributes in this year's World Metrology Day theme, “Measurements and Light”.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Having the latest version of MET/CAL software gives you access to many new features and functions. Here are just a few examples of the additional capabilities added with each new update.

It's obsolete and the manufacturer doesn't support it anymore.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Why calibrate test equipment? What makes it go out of cal? What happens when you send equipment for calibration? When should you calibrate? Learn here.

Fluke Calibration manufactures platinum resistance thermometers, thermocouples, thermistor temperature sensors for precision temperature measurement and calibration

A temperature calibrator, often called a thermometer calibrator, is used to remove inaccuracies in installed thermometers and temperature sensors, because temperature measurement is a critical parameter in many industrial processes.

A platinum resistance thermometer (PRT) is a thermometer constructed from a high purity platinum element (wire-wound coil or thin film) placed in a tube of metal or glass and sealed with an inert atmosphere and/or mineral insulator.

Fluke Calibration manufactures leading primary temperature standards including ITS-90 SPRTs, ITS-90 fixed point cells, water triple point cells, & maintenance apparatus. Learn more.

Precision thermometer readout from Fluke Calibration is easy to use, very accurate, and designed for calibration. Contact us today for more information.

Installing MET/TEMP IICan MET/TEMP II be installed on computers running Windows® Vista?When I install MET/TEMP II, I am prompted to enter a serial number. Where do I find my serial number?I downloaded MET/TEMP II from the internet and installed the demo version. Now I want to buy it and start using it. What do I need to do?I am currently a Fluke MET/TEMP software user. What do I need to know about upgrading to MET/TEMP II?I am currently a Calibrate-it and Generate-it user. What do I need to know...

The demo version comes with a demo license that allows up to two concurrent clients to connect

MET/TEMP II is intended to replace Fluke's MET/TEMP software. MET/TEMP II is a completely different software package than MET/TEMP

Most calibration procedures require comparison of the device under test (DUT) and calibration standard at multiple pressure points across the DUT’s range.

Quick Links-Download Demos, Updates, Service Releases, etc.Technical SupportQuestions about Fluke Calibration Temperature software? This page answers some of the most common questions concerning our software products.All Fluke Calibration temperature calibration software:Q. What version of Windows® is required to run Fluke Calibration Temperature software?A. Please refer to the table below for Windows® compatibility information for the latest version of each software indicated: Software \ Windows®98/98SENT4...

A40 / A40A current shunt from Fluke Calibration enables ac / dc current transfer measurements & operates in the frequency range of 5Hz to 100Khz. Get a quote.

525B temperature/pressure calibrator is the most accurate Fluke Calibration temperature calibrator & also provides high accuracy for pressure calibration.

As tecnologias mais recentes podem ajudar a manter a conformidade, a recolher dados mais precisos e a garantir a segurança. Eis os principais motivos para atualizar agora.

COMPASS for Pressure Basic (.exe)Additional Downloads:COMPASS for Pressure Basic, Demo (.exe)COMPASS for Pressure Basic, Upgrade (.exe)COMPASS for Pressure Enhanced (.exe)COMPASS for Pressure Enhanced, Demo (.exe)COMPASS for Pressure Enhanced, Upgrade (.exe)TITLEVERUSE WITHDOCUMENTSCOMPASS®for Pressure™5.2.102024.05.21FPG8601, PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCH, PPCK, PPCK+, RPM3, RPM4, 7050, 7052, 7250, 7252, 7350, 7615, 7750, 7010, 7215, 2465, 2456, 2271A, 6270A, 8270A, 8370A,Third...

Update: MET/CAL version 10.6.2 for MET/TEAM version 3.2.0 (.zip)Documents:Accuracy Files for Fluke 5540A, 5550A, and 5560A (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers:MET/CAL version 10.6.2 release is an update to previous MET/CAL software. This update includes new Instrument FSCs for the Fluke 5560A, 5550A, and 5540A calibrators and bug fixes.Do not manually uninstall the previous version. If you do this...

Update: MET/CAL version 10.6.2 for MET/CONNECT version 2.1.0 (.zip)Documents:Accuracy Files for Fluke 5540A, 5550A, and 5560A (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available here.Current MET/CONNECT Customers:MET/CAL version 10.6.2 release is an update to previous MET/CAL software. This update includes new Instrument FSCs for the Fluke 5560A, 5550A, and 5540A calibrators and bug fixes.Do not manually uninstall the previous version. If you do this...

Update: MET/CAL version 10.6.1 for MET/TEAM version 3.2.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers:MET/CAL version 10.6.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime...

Update: MET/CAL version 10.6.1 for MET/CONNECT version 2.1.0 (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available here.Current MET/CONNECT Customers:MET/CAL version 10.6.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime...

Update: MET/CAL version 10.5.1 for MET/TEAM version 3.1.1 or 3.1.0 (.zip)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers:MET/CAL version 10.5.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime and/or MET/CAL Editor on any workstations, be...

Update: MET/CAL version 10.5.0 for MET/CONNECT version 2.0.0 (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available with the MET/TEAM 3.1.0 installer.Current MET/CONNECT Customers:MET/CAL version 10.5.0 release is an update to previous MET/CAL software. This update includes new features, bug fixes, and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and...

Update: MET/CAL version 10.4.0 for MET/TEAM version 3.0.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available with the MET/CONNECT 2.0.0 installer.Current MET/TEAM Customers:MET/CAL version 10.4.0 release is an update to previous MET/CAL software. This update includes new features, bug fixes, and minor updates.You must install MET/TEAM version 3.0.0 Hot Fix 2 to use MET/CAL 10.4.0.Do not manually uninstall the previous version. If you do this...

Update: MET/CAL version 10.2.2 for MET/TEAM version 3.0.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available with the MET/CONNECT 1.2.0 installer.Current MET/TEAM Customers:MET/CAL version 10.2.2 release is an update to previous MET/CAL software. This update includes bug fixes and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you...

RPM3 v1.02j Embedded Software (.bin)TITLEVERUSE WITHRPM3™1.02j2005.06.27RPM3Instructions:Do Not use with HGC-30000-AF!Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires...

Release: MET/TEAM version 3.3.0 (with MET/CAL version 11.0.0) (.iso)Documents:MET/TEAM 3.3.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/CAL 11.0.0 Read Me (.pdf)Updating to METTEAM 3.3.0 and METCAL 11.0.0 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.3.0 release is a minor update to MET/TEAM software. The MET/CAL version 11.0.0 release is a major update to MET/CAL software. This update includes new features, improvements, bug fixes, and minor...

Release: MET/TEAM version 3.2.0 (with MET/CAL version 10.6.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.2.0 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from version 3.0.0, 3.1.0, or 3.1.1 directly to version 3.2.0.Upgrading from version 3.x.x of MET/TEAM will not require you to re-request your licenses.Upgrading...

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from either version 3.0.0 or 3.1.0 directly to version 3.1.1.Upgrading from version 3.0.0 or 3.1.0 of MET/TEAM will not require you to re-request your...

Release: MET/TEAM version 3.1.0 (with MET/CAL version 10.5.0) (.iso)Documents:MET/TEAM 3.1.0 Readme (.pdf)MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)Update Instructions for MET/TEAM 3.1.0 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.0 and MET/CAL version 10.5.0 release is a a major update to MET/TEAM and...

MS-PSWD is a service that MET/CAL, MET/TEAM, or 5500/CAL customers can purchase to get their systems password reestablished.

molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

molbox RFM™ v1.20d Embedded Software (.bin)TITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMTITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of...

IR Configuration Utility v1.0 (.exe)IR Configuration Utility v1.0Posted: 01/23/2009Description: The IR Configuration Utility is shipped with supported instruments. Supported instruments include the 4180 and 4181 Precision IR Calibrators.This software is free and does not require a serial number to be installed.Size: 13.9MB

IO Toolkit v1.0 (.exe)IO Toolkit (Model 9940)IO Toolkit v1.0Posted: 09/26/2008Description: The IO Toolkit is shipped with supported instruments. This version includes support for the new 1523 and 1524 series Readouts.This software is free and does not require a serial number to be installed.Size: 7.0MB

Interface-it v3.81 (.exe)Interface-it Temperature Calibration SoftwarePosted: 11/27/2007Description: This version includes drivers for the new 914x series Field Metrology Wells as well as 917x series Metrology Wells.Size: 2.2MB** INTERFACE-IT MAY NOT BE FULLY COMPATIBLE WITH WINDOWS® VISTA  & WINDOWS® 7 **Fluke Calibrations's Interface-it Software Version 3.81 allows nearly all our dry-wells, baths and controllers that are equipped with an RS-232 interface to be controlled remotely from a...

Download COMPASS® for PressureVersion 3 Releases3.00.43 (SP1) (2011.02.11)ADDCP-802Support PG7000 and PG9000 models that respond with FLUKE as the manufacturer.CHGCP-793An automated PG7000/PG9000 system with a PPC and AMH will use ATM as the minimum pressure when exercising in a test that is run in Absolute by ATM.3.00.42 (SP1) (2010.07.07)ADDCP-689Support alternate units of measure and temperature references for the Piston Cylinder effective area.ADDCP-775Added new instruments to the default database.CHGCP-786When...

CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

6270A Embedded Software, Update by USB (.zip)Additional Downloads:6270 PCM v104 USB (.zip)Click here to update by serial RS-232 port.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 6270AUpdating the PCM (Pressure...

6270A Embedded Software, Update by Serial RS-232 Port (.zip)Click here to update by USB.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the RS-232 serial port on the rear panel of the 6270AThe below procedure updates the main firmware. Updating...

Get step-by-step instructions on how to accurately calibrate a hygrometer or other humidity sensor including why it’s important, techniques, and tips.

To minimize plant downtime and keep operations up and running, follow this guidance to ensure smooth instrumentation calibration.

If you are purchasing a calibrator to calibrate pressure measurement devices, follow these 2 simple steps to ensure you get what you need.

There are a few instruments used to perform infrared (IR) thermometer and IR imager calibration. These instruments fall into two categories, cavities and flat-plates. To calculate the uncertainty in using these instruments, the temperature uniformity must be known. This is especially true with flat-plates. This uncertainty may be given in an instrument’s specification. However, there is not a standardized test method to test the uniformity of a flat-plate calibrator as there is with other classes...

À medida que os painéis fotovoltaicos envelhecem, existem várias causas potenciais para um desempenho insuficiente dos sistemas. Algumas podem ser expectáveis, como perdas por sujidade ou a degradação dos painéis a longo prazo. Outras podem ser inesperadas, como a falha de um díodo de derivação, módulos fissurados, etc. Uma vez que os localizadores de curvas I-V captam todos os pontos de funcionamento da corrente e da tensão de uma fonte fotovoltaica, estes possuem uma capacidade única...

É necessário conhecer o plano de irradiância do painel e a temperatura das células para avaliar o desempenho do circuito fotovoltaico, independentemente do método de teste. Para garantir que interpreta as curvas I-V com exatidão, tenha em atenção as condições ambientais, uma vez que as rápidas alterações na irradiância ou na temperatura das células podem introduzir erros nos testes de curvas I-V. Para obter resultados fiáveis, devem ser utilizados tipos de sensores e métodos de teste...

.super-custom html { font-family: sans-serif; -ms-text-size-adjust: 100%; -webkit-text-size-adjust: 100%; font-size: 10px; -webkit-tap-highlight-color: transparent } .super-custom body { font-family: "Helvetica Neue",Helvetica,Arial,sans-serif;font-size:14px;line-height:1.42857143;color:#333;background-color:#fff;margin:0}.super-custom article, .super-custom aside, .super-custom details, .super-custom figcaption, .super-custom figure, .super-custom footer, .super-custom header, .super-custom hgroup,...

Para analisar curvas I-V em sistemas fotovoltaicos, utilize um localizador de curvas I-V para comparar as curvas medidas com as curvas padrão ou previstas, considerando as influências ambientais como a sombra ou a temperatura. O "Fluxograma de resolução de problemas de painéis fotovoltaicos" é um guia abrangente desenvolvido a partir de uma vasta experiência no terreno, de revisões da literatura sobre a fiabilidade dos módulos fotovoltaicos e de contributos de especialistas do National...

Solução completa para testes de segurança e desempenho de estações de carregamento AC de veículos elétricos

A manutenção dos transportadores deve ser eficiente para evitar tempos de inatividade dispendiosos e não planeados. Isto é particularmente importante em indústrias como a produção de alimentos e bebidas, a logística de armazenamento, o fabrico automóvel, a exploração mineira e o manuseamento de matérias-primas. A câmara acústica de precisão Fluke ii910 com modo MecQ™ proporciona uma solução moderna. Esta é capaz de detetar potenciais problemas nos sistemas de transporte antes...

Kit de acessórios de cabos de teste especificamente para rastreamento de fios e circuitos e aplicações de resolução de problemas.

Saiba mais sobre câmaras termográficas para inspeções em edifícios e casas. Encontre a melhor câmara termográfica para AVAC.

A pinça amperimétrica solar Fluke 393 FC, com classificação CAT III 1500 V/CAT IV 600 V, para ambientes CAT III, incluindo instalações solares, é uma ferramenta essencial para a instalação, monitorização e teste de sistemas fotovoltaicos.

Quem inventou o multímetro? De galvanómetros e voltímetros para multímetros digitais com termografia e funcionalidades sem fios. História do modelo de multímetro da Fluke.

Teste e monitorização de descarga parcial utilizando uma câmara acústica Fluke ii910. Saiba como realizar um procedimento de teste de descarga parcial.

Definição de descarga parcial. Saiba como uma descarga parcial ocorre, as suas causas e os 4 tipos principais de descarga parcial.

Maximize o desempenho das suas ferramentas pneumáticas com a câmara acústica Fluke ii900. Diagnostique os problemas de queda de pressão e fluxo do ar nas linhas de ar comprimido de forma fácil e rápida.

O ar comprimido é a "quarta ferramenta" da indústria alimentar e de bebidas, logo após as três principais: água, eletricidade e gás natural. A fiabilidade desta quarta ferramenta depende da pressão de ar estável, o que significa que até pequenas fugas podem representar um custo elevado. Eis as fugas de ar mais detetadas na indústria alimentar e de bebidas, bem como as melhores práticas e tecnologias para as resolver. A câmara acústica industrial Fluke ii900 inclui tecnologia que adiciona...

Veja as diferenças entre as câmaras acústicas Fluke ii900 e ii910 em termos de especificações e de funcionalidade.

Seguir os regulamentos de segurança elétrica em instalações industriais é fundamental. Mas os mitos sobre a segurança elétrica são avassaladores. Compreenda quais são os factos e os mitos sobre como trabalhar em sistemas com corrente.

The 9144 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

The 9143 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

The 1502A and 1504 reference thermometers will read RTDs, PRDs, and thermistor sensors. Primary temperature standards, secondary temperature standards, fixed-point cells, water triple points, SPRTs, calibration baths, dry-block calibrators and temperature metrology training can also be found on this site.

Câmera infravermelha Fluke Ti400

A Fluke Ti300 é fornecida como um conjunto completo com a focagem automática LaserSharp® e um design robusto concebido para durar em qualquer ambiente. Mantenha-se na linha da frente com esta câmara de infravermelhos Fluke.

The 9142 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

O maior investimento de uma empresa não é o equipamento que se encontra atrás da porta de um painel; a principal prioridade consiste em proporcionar a máxima protecção aos electricistas, engenheiros e inspectores que diariamente colocam a vida em risco no desempenho das suas funções.

Fluke CNX 3000 Wireless Test Tools show real-time measurements from remote modules up to 20 meters away. Simultaneous readings on a single screen.

FlukeView software adds PC power to your Fluke ScopeMeter test tool

Saco de ferramentas modular de alta qualidade CNX C3000Saco com rede para um sistema de transporte personalizável quando é utilizado com outras malas modulares CNX.

Mala de 2 compartimentos DMM modular CNX C3002Compatível com o Multímetro sem fios Fluke CNXBolso interior e pega

Mala pequena modular CNX C3001Compatível com os módulos sem fios CNX.

A tensão é a pressão da fonte de alimentação de um circuito elétrico que “empurra” eletrões carregados (corrente) através de um loop condutor, permitindo-lhes funcionar como iluminar uma lâmpada.

Um díodo é um dispositivo semicondutor que basicamente atua como um interruptor de um sentido para a corrente.

As ferramentas sem contacto aumentam a segurança elétrica ao manter os trabalhadores fora de perigo. Infravermelhos (IV), distância por laser, detetor de tensão, display remoto, sem fios

Qualquer pessoa que ganhe a vida a trabalhar com eletricidade desenvolve rapidamente um respeito saudável por qualquer coisa que, ainda que remotamente, possa "ter corrente". No entanto, a pressão de terminar um trabalho dentro do prazo ou restabelecer o funcionamento de um componente essencial pode resultar em descuidos e erros pouco habituais por parte de um eletricista, mesmo o mais experiente.

ROI (retorno sobre o investimento, do inglês Return on Investment) para programas industriais de eficiência energética. Como as fábricas podem identificar desperdícios de energia, economizar em serviços públicos e em custos de energia industrial.

Como identificar perdas de energia através da monitorização e gestão de qualidade da energia. Descubra oportunidades de poupança de energia elétrica que também podem evitar grandes pontos de falha e problemas.

Resolução dos problemas de qualidade da energia mais comuns – distorção de tensão e harmónicos. Ferramentas necessárias, tipos de problemas

Fluke Energy Analyze Plus Software da aplicação Fluke Energy Analyze Plus para transferir, análise e criação de relatórios. Utilizado com Fluke 1730, 1732, 1734, 1736, 1738, 1742, 1746 e 1748. Ficheiro de firmware de Fluke 173x v2.4.1 (.bin) O procedimento de atualização depende da revisão do firmware que está atualmente instalado no equipamento. Para atualizar os equipamentos que executam a revisão 2.0 do firmware, guarde o ficheiro binário de firmware num diretório “Fluke173x”...

Software da aplicação PowerLog Classic para o Fluke VR1710 (.exe) Software da aplicação PowerLog Classic utilizada com o Fluke 345, VR1710, 1735 e 433/434/435. (Compatível com o Windows Vista, 7, 8 e 10). (01/2016) Ferramenta de actualização do firmware VR1710 vA1.34 (.zip) (12/2016)

Software da aplicação PowerLog Classic Software da aplicação PowerLog Classic utilizado com o Fluke 345, VR1710, 1735 e 433/434/435. (Compatível com o Windows Vista, 7, 8 e 10). Ferramentas de atualização do firmware 1735 v3.1 (.exe) Atualize o seu Fluke 1735 para o firmware mais recente. (Compatível com o Vista) Firmware 1735 v1.10 (.zip) Este ficheiro deve ser descompactado e utilizado em associação com as ferramentas de atualização de firmware V3.1 (acima). Última atualização a...

Firmware de medidor de vibrações Fluke 805 v3.0.5 (.bin) Crie rapidamente grupos de equipamentos, equipamentos e pontos de teste utilizando a função Importar modelo na app Fluke Connect™ na web Envie ordens de trabalho e rotas diretamente para o seu 805 FC utilizando a aplicação móvel Fluke Connect™ Configure e edite perfis de máquinas utilizando a aplicação móvel Fluke Connect e envie-os para o seu 805 FC Associe automaticamente resultados de testes a perfis de máquinas Para atualizar...

Vibration Software Downloads

Actualização de Multímetros Digitais