Arama sonuçları

Choosing the right standard for the right calibration workload is essential to ensure the quality and efficiency of your calibrations. This document explains the different types of pressure standards available, what their benefits and drawbacks are, and provides example workloads.

To establish pressures using a DWT or piston gauge, you need to account for the acceleration of gravity where the instrument is operated. Learn more.

This application note summarizes some of the benefits of upgrading to the 6270A, as well as detailing the steps for configuring and installing the 6270A as a replacement to the PACE 5000.

This Resource Center is designed to help you easily see which Fluke Calibration pressure controller is the recommended replacement for your existing older controller.

Fluke Calibration molstic mounting systems provides solution to practical issues of mounting the molbloc, regulating the pressure & connecting the device to be tested.

Having the latest version of MET/CAL software gives you access to many new features and functions. Here are just a few examples of the additional capabilities added with each new update.

It's obsolete and the manufacturer doesn't support it anymore.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Our selection of clamps & stands provides a simple way to hold probes & thermometers in baths during calibration. Highly customizable. See configurations.

Why calibrate test equipment? What makes it go out of cal? What happens when you send equipment for calibration? When should you calibrate? Learn here.

A platinum resistance thermometer (PRT) is a thermometer constructed from a high purity platinum element (wire-wound coil or thin film) placed in a tube of metal or glass and sealed with an inert atmosphere and/or mineral insulator.

Quick Links-Download Demos, Updates, Service Releases, etc.Technical SupportQuestions about Fluke Calibration Temperature software? This page answers some of the most common questions concerning our software products.All Fluke Calibration temperature calibration software:Q. What version of Windows® is required to run Fluke Calibration Temperature software?A. Please refer to the table below for Windows® compatibility information for the latest version of each software indicated: Software \ Windows®98/98SENT4...

The Fluke Calibration ADCS-601 is a fully automated reference level Air Data Calibration Standard for the verification and calibration of air data range instruments, in particular Air Data Test Sets (ADTS).

World Metrology Day 2014A message from Fluke Chief Corporate Metrologist Jeff GustWorld Metrology Day commemorates the signing of the Meter Convention on May 20, 1875. Those who are dedicated to metrology, the science of measurement, recognize this day each year as their time to celebrate the importance of measurements. Fluke Corporation joins enthusiastically in this annual celebration, as we have a long history of dedication to metrology. The theme for World Metrology Day 2014 is “Measurements...

The FPG8601 piston gauge from Fluke Calibration addresses the need for a means of maintaining long term traceability with very low uncertainty in the pressure range under that covered by conventional piston gauges.

The piston gauge from Fluke Calibration offers pressure calibration standards that provide automated operations and thermal transpiration correction.

The Fluke 2620T/2635T Recording Thermometer is a precision multi channel temperature recording and logging instrument that delivers up to 0.1 degree accuracy (3 sigma, one year accuracy specification) for temperature monitoring and calibration applications

Thermocouple calibrator from Fluke Calibration is very stable, CE compliant & can operate in wide temperature range. Request a quote today.

Annual global event highlights why measurement matters in everyday lifeEverett, Wash., May 20, 2013 – On May 20th, scientists and organizations dedicated to metrology celebrate World Metrology Day, which commemorates the signing of the international treaty to coordinate weights and measures activities and support the development of the metric system. Fluke Corporation recognizes World Metrology Day as a time to appreciate the scientists in national laboratories throughout the world who dedicate...

World Metrology Day 2013A message from Fluke Chief Corporate Metrologist Jeff GustScientists and engineers dedicated to metrology (the science of measurements) celebrate May 20 as World Metrology Day. On May 20 1875, representatives from seventeen nations signed an international treaty to coordinate weights and measures activities internationally and to support the development of the metric system. The theme for World Metrology Day 2013 is “Measurements in daily life.” In keeping with this year’s...

World Metrology Day 2012 MessageWorld Metrology Day commemorates the signing of the Meter Convention on May 20, 1875. Those who are dedicated to metrology, the science of measurement, recognize this day each year as their time to celebrate the importance of measurements. The theme for World Metrology Day 2012 is “Metrology for Safety.” Fluke Corporation, one of the world’s leading metrology companies, is dedicated to facilitating workers’ safety through test and measurement tools as well...

The 6003A Three Phase Electrical Power Calibrator from Fluke Calibration offers compact, accurate three-phase power in a single, easy-to-use instrument.

5522A is a resistance calibrator that calibrates a wide variety of electrical test equipment, provides reverse power protection and is remarkably affordable.

525B temperature/pressure calibrator is the most accurate Fluke Calibration temperature calibrator & also provides high accuracy for pressure calibration.

The 4322 Automated Pressure Calibration System calibrates almost any pressure gauge, transducer, transmitter or switch—including vacuum, compound, absolute & high-pressure devices.

The Model 2485 Hydraulic Deadweight Gauge by Fluke Calibration is a high precision standard that gives unsurpassed performance.

The The Model 2482 piston gauge from Fluke Calibration is a high precision standard that provides unsurpassed performance in the field of differential pressure metrology at high static line pressures.

ITS-90 fixed-point cells from Fluke Calibration is constructed in ultra clean labs, using high-density, high-purity graphite crucibles containing metal samples with purity of at least 99.9999 %.

1594A/1595A Firmware update version 1.22 (.ud)Title: 1594A & 1595AVer: 1.22/1.02Use with: All 1594A & 1595ADate Modified: 2/20/2014Description of the change:  It was recently determined that when a customer selects the “Restore Factory Default” button in the Config Menu, the resistor calibration values are reset to the default values without requiring a password or notification to the customer that the values are being reset. Engineering has investigated this issue and the instrument firmware...

Release: MET/TEAM version 3.0.0 (with MET/CAL version 10.2.0) (.iso)Documents:MET/TEAM version 3.0.0 (with MET/CAL version 10.2.0) (.pdf)MET/TEAM 3.0.0 ReadMe (.pdf)MET/CAL 10.2.0 ReadMe (.pdf)MET/TEAM Installation Guide (Updated for version 3.0) (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.0.0 and MET/CAL version 10.2.0 release is a a major update to MET/TEAM and MET/CAL software. This update includes new features, improvements, bug fixes, and minor...

MET/TEMP II Software Download (.exe)TITLEVERLinksMET/TEMP II5.2Product PageDescriptionWhen downloaded, this file can be run to install MET/TEMP II. There is no free demo/trial version of 5.2. In order to install MET/TEMP II v5.2, you must purchase the software and obtain a serial number. The installation process prompts you to enter the serial number. Version 5.2 does not accept serial numbers from previous versions of MET/TEMP II. The serial number will be located on a sticker on the CD pouch....

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)Documents:MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/TEAM 3.1.1 Readme (.pdf)Update Instructions for MET/TEAM 3.1.1 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You...

MET/TEAM version 2.2 (with MET/CAL version 9.1) (.iso)Documents:MET/CAL 9.1.0 Readme (.pdf)MET/TEAM 2.2.0 Readme (.pdf)Updating to MET/TEAM 2.2 and MET/CAL 9.1 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThere has been a major change to the MET/TEAM database which means updating to version 2.2 is a multistep process that could take from 8 to 24 hours depending on your database, server configuration, and network environment.There has been a major change to MET/CAL regarding...

MET/TEAM version 2.1 with Update 1 (with MET/CAL version 9.0 with Update 1) (.iso)Documents:MET_TEAM_2_1_2_readme (.pdf)METCAL_9.0.0_ReadMe (.pdf)Please read the MET/TEAM Readme file before installing the upgrade.Please note that upgrading from any previous version of MET/TEAM will require you to re-request all of your licenses via email once the upgrade is complete! You must provide your original product codes and gold number(699XXXX) as two separate product code entry lines.If you are upgrading...

FPGTools PC Based Software (.exe)File size is 171.33 mb.TITLEVERUSE WITHFPGTools™3.03f2010.06.03FPG8601DescriptionFPGTools is PC based software.SummaryThis application is the PC interface to the FPG8601 and the VLPC. Features are included to log data from the FPG and up to 5 DUTs, run test sequences, and perform all necessary routine procedures required by the FPG. This application cannot be used without an FPG8601 and a functioning RS232 port on the host computer.Instructions:Download and run...

COMPASS Example Set Up Database (.mdb)About COMPASS ExamplesCOMPASS examples are existing setups that are used as a guide to help add a new device to COMPASS.  There are 2 types of examples: those that appear directly in the DUT and/or Support Device Editors and those that do not.  Only a few examples are visible in the device editors.  This is in an attempt to minimize the confusion between various COMPASS setups.  The majority of the COMPASS examples are not directly visible to the user. ...

WinFlash Free Utility (.exe)Additional Downloads: WinFlash64™ 2.20 (64bit OS) (.exe)PC BasedFree Utilities - WinFlash™TITLEVERUSE WITHWinFlash™2.202011.10.05PPC2+, PPC3, PPC4, PPCH, PPCHG, PPCK+, MFC-CB, molbox1, molbox1+, molbox RFM, PG7000, RPM3, RPM4, RPM4-AD, RPM4-AF, RPM4-E-DWTWinFlash64™(64bit OS)2.202011.10.05PPC2+, PPC3, PPC4, PPCH, PPCHG, PPCK+, MFC-CB, molbox1, molbox1+, molbox RFM, PG7000, RPM3, RPM4, RPM4-AD, RPM4-AF, RPM4-E-DWTDescriptionFirmware upgrade utility. This program...

Update: MET/TEAM version 2.2.1 (with MET/CAL version 9.1.1) (.iso)Documents:MET/CAL 9.1.1 Readme (.pdf)MET/TEAM 2.2.1 Readme (.pdf)Updating to METTEAM 2.2.1 and METCAL 9.1.1 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 2.2.1 and MET/CAL version 9.1.1 release is a stability update to previous MET/TEAM and MET/CAL software. This update includes bug fixes and minor updates.Upgrading from any previous version of MET/TEAM will require you to re-request...

Unit of Measure Converter Free Utility (.exe)TITLEVERUSE WITH Unit of Measure Converter Free Utility2.01a2006.08.15All Products Instructions:Download and run the file. The installation program will prompt you through the process.DescriptionThe Unit of Measure Converter is a free ActiveX control distributed by Fluke Calibration. This program can be run stand alone or built into other applications. Use the [Show Help] menu choice for details on using this tool.Warning - Fluke Calibration has made...

RPM4-AD v1.00f Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-AD™1.00f2010.12.28RPM4-ADDo NOT use with NON "-AD" (Air Data)RPM4 ModelsInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

RPM4 v1.01I Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4™1.01I2019.04.28RPM4Note: If you have a special RPM4model use these links:RPM4-AD™RPM4-AF™RPM4-E-DWT A70M/A7M-AF™RPM4-E-DWT™Please contact our Calibration and Repair department at 602.773.4782 if you recently upgraded to version 1.01f or plan to upgrade from 1.01f to another version. The upgrade path from 1.01f may cause a potentially significant metrological error.Instructions:Download the file.Run Winflash and select...

Release: MET/TEAM version 3.3.0 (with MET/CAL version 11.0.0) (.iso)Documents:MET/TEAM 3.3.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/CAL 11.0.0 Read Me (.pdf)Updating to METTEAM 3.3.0 and METCAL 11.0.0 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.3.0 release is a minor update to MET/TEAM software. The MET/CAL version 11.0.0 release is a major update to MET/CAL software. This update includes new features, improvements, bug fixes, and minor...

Release: MET/TEAM version 3.2.0 (with MET/CAL version 10.6.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.2.0 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from version 3.0.0, 3.1.0, or 3.1.1 directly to version 3.2.0.Upgrading from version 3.x.x of MET/TEAM will not require you to re-request your licenses.Upgrading...

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from either version 3.0.0 or 3.1.0 directly to version 3.1.1.Upgrading from version 3.0.0 or 3.1.0 of MET/TEAM will not require you to re-request your...

Release: MET/TEAM version 3.1.0 (with MET/CAL version 10.5.0) (.iso)Documents:MET/TEAM 3.1.0 Readme (.pdf)MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)Update Instructions for MET/TEAM 3.1.0 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.0 and MET/CAL version 10.5.0 release is a a major update to MET/TEAM and...

MS-PSWD is a service that MET/CAL, MET/TEAM, or 5500/CAL customers can purchase to get their systems password reestablished.

In the unlikely event that you experience corrupt data when using MET/CAL® Plus calibration management software, we may be able to help.

PPCK+ v1.00m Embedded Software (.bin)TITLEVERUSE WITHPPCK+™1.00m2005.01.05PPCK+Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded software.The...

PPCH-G v1.02k Embedded Software (.bin)TITLEVERUSE WITHPPCH-G™1.02k2023.11.08PPCH-GInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

PPCH-G v1.02f Embedded Software (.bin)TITLEVERUSE WITHPPCH-G™1.02f2012.04.04PPCH-GInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

PPCH 1.01n Embedded Software (.bin)TITLEVERUSE WITHPPCH™1.01n2013.07.22PPCHInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded software.The...

PPC4 v1.2.6.14 Embedded Software (.bin)TITLEVERUSE WITHPPC4™1.2.6.14PPC4 (including -AF models)Instructions:Download the file by clicking on "PPC4 v1.2.6.14.bin".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

PPC4 Cockpit Free Utility - 32bit Installer (.exe)Additional Downloads:PPC4 Cockpit Free Utility - 64bit Installer (.exe)TITLEVERUSE WITHDOCUMENTSPPC4™ CockpitFree Utility2.002010.03.02PPC4TITLEVERUSE WITHDOCUMENTSPPC4™ CockpitFree Utility2.002010.03.02PPC4Reference the PPC4 Operation and Maintenance manual for details on the operation of the PPC4 Cockpit.Instructions:Download and run the file. The installation program will prompt you through the process.DescriptionThe PPC4 Cockpit is a free...

PPC2-AF v1.01e Embedded Software (.bin)TITLEVERUSE WITHPPC3™1.03d2011.10.21PPC3 (including -AF models)Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should only be performed after...

PPC2-AF v1.01e Embedded Software (222.5 KB)TITLEVERUSE WITHPPC2-AF™1.01e2006.11.17PPC2-AFTITLEVERUSE WITHPPC2-AF™1.01e2006.11.17PPC2-AFInstructions:Do Not use with PPC2+!This software revision affects only the PPC2-AF on-board routines for calibration of the PPC2-AF's RPTs. It has no effect on regular operation. This new release is recommended for all PPC2-AF units, in particular those on which difficulty with calibration of the Lo Reference Pressure Transducer has been encountered. The FCAL...

PPC2+ v2.02f Embedded Software (.bin)TITLEVERUSE WITHPPC2+™2.02f2002.08.13PPC2+TITLEVERUSE WITHPPC2+™2.02f2002.08.13PPC2+Instructions:Do Not use with PPC2-AF!Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

The Fluke Calibration 9118A Thermocouple Calibration Furnace is a horizontal, open-ended tube furnace with a temperature range of 300 °C to 1200 °C.

Achieve precise calibration for oscilloscopes up to 4GHz with the Fluke 9500C. Features Active Head Technology™ for efficient, automated multi-channel calibration.

The 5790B AC Measurement Standard is a multi-purpose ac measurement and transfer standard designed for the most demanding calibration applications.

5698-25 SPRT from Fluke Calibration meets ITS-90 SPRT guidelines, has a drift rate of 0.003 °C & covers a temperature range from –200 °C to 670 °C.

PG7000 Ver 2.01 Embedded Software (.bin)TITLEVERUSE WITHPG7000™2.01PG7102, PG7302 or PG7601Instructions:TITLEVERUSE WITHPG7000™2.01PG7102, PG7302 or PG7601Instructions:-Ver 2.00 UsersYour PG7000™ time and date will not operate with Ver 2.01 until a hardware change is implemented.-Ver 1.0x UsersVer 2.01 is a major revision which should be accompanied by hardware changes. Contact a Fluke Calibration Authorized Service Center for additional information.Download the file. Run Winflash and select...

5080A Multi-Product Calibrator calibrates digital & analog meters up to 800 mA for ac/dc voltage & voltage up to 50 V for ac/dc current. Request a quote today!

7196 LN2 Comparison Calibrator from Fluke Calibration is simple to use and offers low-cost calibrations to –196°C. Request a quote today!

molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

molbox RFM™ v1.20d Embedded Software (.bin)TITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMTITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of...

LabView® drivers for Pressure and Flow Calibration Products:6270A Modular Pressure Controller/Calibrator »  LabView® drivers for Pressure and Flow Calibration Products:6270A Modular Pressure Controller/Calibrator » 7250 Series Pressure Controller/Calibrator » 7615 Hydraulic Pressure Controller/Calibrator » 7750i Air Data Test Set » molbox1+ Mass Flow Terminal » PPC4 Pressure Controller/Calibrator » PPCH Hydraulic Pressure Controller/Calibrator » RPM4 Reference Pressure...

LabVIEW driver for PPC3 and PPCH (.exe)Additional Downloads:LabVIEW driver for PPC2+ and PPCK+ (.exe)LabVIEW driver for PPC2 and PPCK (.exe)LabVIEW driver for RPM3 (.exe)LabVIEW driver for RPM4 (.exe)LabVIEW driver for molbox (.exe)LabVIEW driver for molbox RFM (.exe)LabView® drivers for Pressure ProductsUSE WITHVERDOWNLOADPPC3™DescriptionLabView is a registered trademark of National Instruments Corp.Instructions:As noted by the table, some of the LabView Drivers support more than one product....

IR Configuration Utility v1.0 (.exe)IR Configuration Utility v1.0Posted: 01/23/2009Description: The IR Configuration Utility is shipped with supported instruments. Supported instruments include the 4180 and 4181 Precision IR Calibrators.This software is free and does not require a serial number to be installed.Size: 13.9MB

IO Toolkit v1.0 (.exe)IO Toolkit (Model 9940)IO Toolkit v1.0Posted: 09/26/2008Description: The IO Toolkit is shipped with supported instruments. This version includes support for the new 1523 and 1524 series Readouts.This software is free and does not require a serial number to be installed.Size: 7.0MB

Interface-it v3.81 (.exe)Interface-it Temperature Calibration SoftwarePosted: 11/27/2007Description: This version includes drivers for the new 914x series Field Metrology Wells as well as 917x series Metrology Wells.Size: 2.2MB** INTERFACE-IT MAY NOT BE FULLY COMPATIBLE WITH WINDOWS® VISTA  & WINDOWS® 7 **Fluke Calibrations's Interface-it Software Version 3.81 allows nearly all our dry-wells, baths and controllers that are equipped with an RS-232 interface to be controlled remotely from a...

Hot Fix: MET/CAL version 10.1.0 Hot Fix (.zip)Documents:MET/CAL version 10.1.0 Hot Fix Readme (.pdf)This hot fix applies to both MET/TEAM and MET/CONNECT versions of MET/CAL.For additional information on applying this Hot Fix, see the following article on our support knowledge base: How to Get and Apply the MET/CAL 10.1.0 Hot FixCurrent MET/CAL Customers:The MET/CAL 10.1.0 Hot Fix release is an update to previous MET/CAL software. This update includes bug fixes only.This download does not include...

GFSTools PC Based Software (.exe)TITLEVERUSE WITHGFSTools™1.012010.12.03GFS 2102DescriptionGFS Tools is a PC based application used to operate the GFS 2102 Gravimetric Flow Standard.  SummaryGFS Tools is the PC based interface to the GFS 2102. All necessary features are included to log data for up to 2 DUTs in comparison to the GFS from 1 sccm of N2 to 10 slm of N2. Options are provided to set manual or automatic flows using an MFC and to define a test sequence of flow points to fully automate...

Download COMPASS® for PressureVersion 4 Releases4.2 (2012.07.27)ADDCP-115%4COMPASS for Pressure now supports the calibration functions of CalTool for RPTs. This functionality allows users to fully adjust and report calibration results for supported Fluke products. Sample tests are included with COMPASS that support automated collection of as received data and as left data with an adjustment in between. Review the CalTool for RPTs application note for details. The COMPASS CalTool implementation supports...

Download COMPASS® for PressureVersion 3 Releases3.00.43 (SP1) (2011.02.11)ADDCP-802Support PG7000 and PG9000 models that respond with FLUKE as the manufacturer.CHGCP-793An automated PG7000/PG9000 system with a PPC and AMH will use ATM as the minimum pressure when exercising in a test that is run in Absolute by ATM.3.00.42 (SP1) (2010.07.07)ADDCP-689Support alternate units of measure and temperature references for the Piston Cylinder effective area.ADDCP-775Added new instruments to the default database.CHGCP-786When...

COMPASS for molbox PC Based Software Demo (.exe)COMPASS for molbox PC Based Software Upgrade (.exe)TITLEVERUSE WITHCOMPASS®for molbox™4.062010.10.28TITLEVERUSE WITHCOMPASS®for molbox™4.062010.10.28molbox1, molbox1+, molbox RFMDescriptionThis download file provides 100 hours of fully functioning use of COMPASS for molbox. Licensed users can download this file to upgrade from a previous version of COMPASS for molbox.  SummaryCOMPASS for molbox is a complete flow calibration software package...

COMPASS for Flow PC Based Software (.exe)Additional Downloads:COMPASS for Flow, PC Based Software, Demo (.exe)COMPASS for Flow, PC Based Software, Upgrade (.exe)Patch to use COMPASS for Flow 4.0 with MET/TRACK 7.3 SP1 (.zip)Patch to use COMPASS for Flow 4.0 with MET/TRACK 8.X (.zip)TITLEVERUSE WITHDOCUMENTSCOMPASS®for Flow™5.1.0molbox1, molbox1+, molbox1+S, molbox RFM, MFC-CB, MFC SwitchboxCOMPASS for Flow uses an on line HTML help system that is installed with the program. Install and run COMPASS...

CI Editor PC Based Free Utility (.exe)Additional Downloads:Mensor 400 CI Definition (.ci)Mensor 600 CI Definition (.ci)DH Instruments PPC2+ CI Definition (.ci)DH Instruments PPC2+ CI Definition (.ci)Ruska 6000 CI Definition (.ci)All Ruska models that support the SCPI command syntax (.ci)TITLEVERUSE WITHDOCUMENTSCI Editor™1.002009.03.06PPC4See CI Editor [Help] menu to access the help system.Instructions:The CI Editor is used to maintain CI Definitions for the PPC4.Download and run the file. The...

CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

9142 US/EU ver 1.35 firmware update (.zip)Additional Downloads:9142 Asia ver 1.35 firmware update (.zip)9143 US/EU ver 1.35 firmware update (.zip)9143 Asia ver 1.35 firmware update (.zip)9144 US/EU ver 1.35 firmware update (.zip)9144 Asia ver 1.35 firmware update (.zip)Download appropriate file from above. See "Instructions" below to determine correct file. Title914x Ver 1.35 UpdateVer1.35/1.35Use withAll 9142/9143/9144 Field Metrology Wellswith internal reference readout (–P option)Date Modified18-May-2012Description...

8588A & 8558A Firmware, Update by USB (.zip)TITLEUSE WITH8588A & 8558AAllThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by USBFluke 85xx update v1.32To update a Fluke 8588A/8558AAn empty USB stick (of greater than 10Mbytes) will be required. This should be formatted using...

8270A/8370A Embedded Software (.zip)TITLEUSE WITH8270A/8370A8270A/8370AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 8270A/8370AUpdating the firmware (embedded software) of an 8270A or 8370A pressure controller requires only a...

6270A Embedded Software, Update by USB (.zip)Additional Downloads:6270 PCM v104 USB (.zip)Click here to update by serial RS-232 port.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 6270AUpdating the PCM (Pressure...

6270A Embedded Software, Update by Serial RS-232 Port (.zip)Click here to update by USB.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the RS-232 serial port on the rear panel of the 6270AThe below procedure updates the main firmware. Updating...

6003A Firmware Update (.zip)TITLEUSE WITH6003AAllThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by USBInstallationPut the CD into the computer, wait for autorun and select “Software installation” and “Uploader” or start direct “install\freeware\uploader”.Uninstall...

4180 Firmware Update v. 1.14 (.zip)Title:                  4180 Ver 1.14 UpdateVer:                    1.14/1.10Use with:           4180Date Modified:  03/07/2013Description of the change:  Firmware updated to fix a bug found in the SetPt menu screen when operating the F4 disable key in release Vers 1.13/1.10.Changed the unit operation to use the Emissivity from the active program when operating a program. Recalibration of unit is not required with...

1620A Firmware Update v. 1.15 (.exe)Title:1620A Firmware UpdateVer:1.15Use with:All 1620ADate Modified:7/23/2013Description of the change: NoneDownload Requirements:          Locate a computer with an available RS-232 COM port, with Windows XP or newer operating system.Locate an RS-232 Null modem cable and connect one end of the cable to the instrument, the other end to the RS-232 serial port on the computer. Note: If your computer only has USB serial interface, an adapter from USB...

Fluke Calibration’s 1529 Chub-E4 Thermometer gives you four channels, three major sensor types, lab-quality accuracy, and a ton of great features.

1529 Firmware Update v. 2.04/1.00 (.zip)Title:                  1529 Main FirmwareVer:                    2.04/1.00Use with:           1529Date Modified:  9/5/2012Description of the change: NoneDownload Requirements:          Locate a computer with an available RS-232 COM port, with Windows XP or newer operating system.Locate an RS-232 Null modem cable and connect one end of the cable to the instrument, the other end to the RS-232 serial...

Güneş Enerjisi Performansını Optimize Edin: PVA-1500HE2 PV Analiz Cihazı, 393 FC Pensampermetre ve 87V Multimetre

Güneş Enerjisi Performansını Optimize Edin: PVA-1500HE2 PV Analiz Cihazı ve 1537 Yalıtım Test Cihazı 2500V

Güneş Enerjisi Performansını Optimize Edin: PVA-1500HE2 PV Analiz Cihazı ve TiS75+ Termal Kamera

Güneş Enerjisi Performansını Optimize Edin: PVA-1500HE2 PV Analiz Cihazı, 1587 FC Yalıtım Multimetresi, 393 FC Pensampermetre ve 87V Multimetre

Gelişmiş PV modelleme, hızlı taramalar, kablosuz kurulum ve otomatik veri yönetimi sayesinde 1.500 V/30 A değerine kadar olan I-V eğrilerini ölçün ve görüntüleyin.

Dear Customer, Thank you for registering your product(s) as part of our product safety recall of your FLUKE-17XX, Flat Cable, Voltage Test Lead 3-phase+N (Recalled Cable). We have received your information, and your order is in process. We will soon be sending you a cable replacement to correct your Recalled Cable(s). A Fluke representative may contact you shortly if more information is needed. Please accept our most sincere apologies for any inconvenience caused by this action and should you have...

Upgrade to FlukeView version 5.4 (.exe)   Application software for download, analysis and reporting. Used with Fluke 190 Series II, Fluke 120 Series, Fluke 19xB/C Series and Fluke 2x5C Series. This is a demo version with limited functionality. The full version can be obtained with activation key that is available as an option. Release notes: Relative to the previous version the following changes have been implemented: Support for increased amount of memory locations in newer Fluke-104 and Fluke-204...

FlukeView Forms Basic 3.8.4 (.exe)FlukeView Forms plus Designer 3.8.4 (.exe)Fluke 975 USB Drivers 1.5.0.22 (.zip)FlukeView Forms Software.Anyone with FlukeView Forms version 3.0 or later can receive a free software update by clicking the links and downloading the software from this site. Basic users would select the "Basic" link and users with the complete package would select the "plus Designer" link. If your present FlukeView Forms software is older than version 3.0 (less than 3.0) you must purchase...

Applies only to Firmware Version 1.00, 1.01 and 1.02 To upgrade your 75X to the latest firmware, follow these simple instructions: Download Fluke?75X Version 1.03 firmware upgrade and save the firmware upgrade file. Ensure your Fluke 75x is connected to your Windows PC computer via USB cable and using the battery charger for power. Run the file and follow the instructions for doing the update. Do not turn off the PC or the 75x while the update is in progress. Once the update is complete, cycle the...