ผลการค้นหา

To establish pressures using a DWT or piston gauge, you need to account for the acceleration of gravity where the instrument is operated. Learn more.

You’ll want to test thermocouples at regular calibration intervals & if you suspect them of failing to meet performance specifications. Learn how here.

A typical 3-point calibration of 4 tri-clamp sanitary sensors takes over 4 hours (259.45 minutes) using a 7103 Micro-Bath. The same calibration using a 7109A Portable Calibration Bath takes about 2 hours (130.0 minutes). That’s a time savings of more than 2 hours per 4-sensor batch!

EN 50191, Electrical Safety Testing Standard for the Erection and Operation of Electrical Test Equipment

See the benefits of upgrading the GE Druck PACE 6000 to the Fluke 6270A & learn steps for configuring and installing the 6270A. Get the details here.

This application note summarizes some of the benefits of upgrading to the 6270A, as well as detailing the steps for configuring and installing the 6270A as a replacement to the PACE 5000.

How do you choose a multi-product electrical calibrator? They are not all the same. Read this short blog post to learn seven essential points to consider.

If you’re in the market for an isothermal bath (temperature calibration bath), you may have already noticed that many suppliers provide technical specifications that are confusing or incomplete. Read this short article to learn 4 key specifications to review to help make the best decision and avoid a mistake.

This Resource Center is designed to help you easily see which Fluke Calibration pressure controller is the recommended replacement for your existing older controller.

Read this short blog post to see how Fluke Calibration contributes in this year's World Metrology Day theme, “Measurements and Light”.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Having the latest version of MET/CAL software gives you access to many new features and functions. Here are just a few examples of the additional capabilities added with each new update.

It's obsolete and the manufacturer doesn't support it anymore.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Why calibrate test equipment? What makes it go out of cal? What happens when you send equipment for calibration? When should you calibrate? Learn here.

Fluke Calibration manufactures platinum resistance thermometers, thermocouples, thermistor temperature sensors for precision temperature measurement and calibration

A temperature calibrator, often called a thermometer calibrator, is used to remove inaccuracies in installed thermometers and temperature sensors, because temperature measurement is a critical parameter in many industrial processes.

A platinum resistance thermometer (PRT) is a thermometer constructed from a high purity platinum element (wire-wound coil or thin film) placed in a tube of metal or glass and sealed with an inert atmosphere and/or mineral insulator.

Fluke Calibration manufactures leading primary temperature standards including ITS-90 SPRTs, ITS-90 fixed point cells, water triple point cells, & maintenance apparatus. Learn more.

Precision thermometer readout from Fluke Calibration is easy to use, very accurate, and designed for calibration. Contact us today for more information.

Installing MET/TEMP IICan MET/TEMP II be installed on computers running Windows® Vista?When I install MET/TEMP II, I am prompted to enter a serial number. Where do I find my serial number?I downloaded MET/TEMP II from the internet and installed the demo version. Now I want to buy it and start using it. What do I need to do?I am currently a Fluke MET/TEMP software user. What do I need to know about upgrading to MET/TEMP II?I am currently a Calibrate-it and Generate-it user. What do I need to know...

The demo version comes with a demo license that allows up to two concurrent clients to connect

MET/TEMP II is intended to replace Fluke's MET/TEMP software. MET/TEMP II is a completely different software package than MET/TEMP

Most calibration procedures require comparison of the device under test (DUT) and calibration standard at multiple pressure points across the DUT’s range.

Quick Links-Download Demos, Updates, Service Releases, etc.Technical SupportQuestions about Fluke Calibration Temperature software? This page answers some of the most common questions concerning our software products.All Fluke Calibration temperature calibration software:Q. What version of Windows® is required to run Fluke Calibration Temperature software?A. Please refer to the table below for Windows® compatibility information for the latest version of each software indicated: Software \ Windows®98/98SENT4...

A40 / A40A current shunt from Fluke Calibration enables ac / dc current transfer measurements & operates in the frequency range of 5Hz to 100Khz. Get a quote.

525B temperature/pressure calibrator is the most accurate Fluke Calibration temperature calibrator & also provides high accuracy for pressure calibration.

เทคโนโลยีที่ใหม่กว่าจะช่วยให้คุณระบบของคุณเป็นไปตามมาตรฐาน เก็บรวบรวมข้อมูลได้แม่นยำยิ่งขึ้น และช่วยให้คุณปลอดภัยมากขึ้น ต่อไปนี้เป็นเหตุผลหลักๆ ที่คุณควรอัปเกรดตอนนี้

MET/TEMP II Software Download (.exe)TITLEVERLinksMET/TEMP II5.2Product PageDescriptionWhen downloaded, this file can be run to install MET/TEMP II. There is no free demo/trial version of 5.2. In order to install MET/TEMP II v5.2, you must purchase the software and obtain a serial number. The installation process prompts you to enter the serial number. Version 5.2 does not accept serial numbers from previous versions of MET/TEMP II. The serial number will be located on a sticker on the CD pouch....

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)Documents:MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/TEAM 3.1.1 Readme (.pdf)Update Instructions for MET/TEAM 3.1.1 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You...

MET/TEAM version 2.2 (with MET/CAL version 9.1) (.iso)Documents:MET/CAL 9.1.0 Readme (.pdf)MET/TEAM 2.2.0 Readme (.pdf)Updating to MET/TEAM 2.2 and MET/CAL 9.1 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThere has been a major change to the MET/TEAM database which means updating to version 2.2 is a multistep process that could take from 8 to 24 hours depending on your database, server configuration, and network environment.There has been a major change to MET/CAL regarding...

Fluke DAQ Software (.zip)Discontinued ProductThis product has been discontinued. The download is still available for existing users to download for installation as necessary.DescriptionFluke DAQ 6.0.4 application software for use with Fluke data acquisition and temperature scanning products (2638A, 1586A, 2640A, 2645A, 2680A, 2686A). Version 6.04 is an update to Version 6.03.Evaluation Mode:Without an activation key this program will run for 40-hours of cumulative run-time in Evaluation (DEMO) mode....

Update: MET/CAL version 10.6.2 for MET/TEAM version 3.2.0 (.zip)Documents:Accuracy Files for Fluke 5540A, 5550A, and 5560A (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers:MET/CAL version 10.6.2 release is an update to previous MET/CAL software. This update includes new Instrument FSCs for the Fluke 5560A, 5550A, and 5540A calibrators and bug fixes.Do not manually uninstall the previous version. If you do this...

Update: MET/CAL version 10.6.2 for MET/CONNECT version 2.1.0 (.zip)Documents:Accuracy Files for Fluke 5540A, 5550A, and 5560A (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available here.Current MET/CONNECT Customers:MET/CAL version 10.6.2 release is an update to previous MET/CAL software. This update includes new Instrument FSCs for the Fluke 5560A, 5550A, and 5540A calibrators and bug fixes.Do not manually uninstall the previous version. If you do this...

Update: MET/CAL version 10.6.1 for MET/TEAM version 3.2.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers:MET/CAL version 10.6.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime...

Update: MET/CAL version 10.6.1 for MET/CONNECT version 2.1.0 (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available here.Current MET/CONNECT Customers:MET/CAL version 10.6.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime...

Update: MET/CAL version 10.5.1 for MET/TEAM version 3.1.1 or 3.1.0 (.zip)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers:MET/CAL version 10.5.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime and/or MET/CAL Editor on any workstations, be...

Update: MET/CAL version 10.5.0 for MET/CONNECT version 2.0.0 (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available with the MET/TEAM 3.1.0 installer.Current MET/CONNECT Customers:MET/CAL version 10.5.0 release is an update to previous MET/CAL software. This update includes new features, bug fixes, and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and...

Update: MET/CAL version 10.4.0 for MET/TEAM version 3.0.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available with the MET/CONNECT 2.0.0 installer.Current MET/TEAM Customers:MET/CAL version 10.4.0 release is an update to previous MET/CAL software. This update includes new features, bug fixes, and minor updates.You must install MET/TEAM version 3.0.0 Hot Fix 2 to use MET/CAL 10.4.0.Do not manually uninstall the previous version. If you do this...

Update: MET/CAL version 10.2.2 for MET/TEAM version 3.0.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available with the MET/CONNECT 1.2.0 installer.Current MET/TEAM Customers:MET/CAL version 10.2.2 release is an update to previous MET/CAL software. This update includes bug fixes and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you...

Update: MET/CAL version 10.1.1 for MET/TEAM 2.3.0 (.zip)Documents:MET/CAL 10.1.1 Readme (.pdf)This update does not impact MET/CONNECT Customers. It includes the existing Hot Fix for MET/CAL version 10.1.0.Current MET/TEAM Customers:MET/CAL version 10.1.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If...

TableWare v2.4 Working Demo (.exe)TableWare v2.4 Working DemoPosted: 09/29/2005Description: The TableWare Working Demo does everything the actual software does, except actually calculate coefficients from raw data. The coefficients used by the working demo are generic and serve only to demonstrate the capabilities of the software.Serial Number to Install Demo Version: DEMOSize: 2.1MBUpgrade TableWare V2.x to v2.4Posted: 09/29/2005Description: Upgrades TableWare v2.x to version 2.4.  A serial number...

RPM4-AD v1.00f Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-AD™1.00f2010.12.28RPM4-ADDo NOT use with NON "-AD" (Air Data)RPM4 ModelsInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

RPM4 v1.01I Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4™1.01I2019.04.28RPM4Note: If you have a special RPM4model use these links:RPM4-AD™RPM4-AF™RPM4-E-DWT A70M/A7M-AF™RPM4-E-DWT™Please contact our Calibration and Repair department at 602.773.4782 if you recently upgraded to version 1.01f or plan to upgrade from 1.01f to another version. The upgrade path from 1.01f may cause a potentially significant metrological error.Instructions:Download the file.Run Winflash and select...

RPM3 v1.02j Embedded Software (.bin)TITLEVERUSE WITHRPM3™1.02j2005.06.27RPM3Instructions:Do Not use with HGC-30000-AF!Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires...

Release: MET/TEAM version 3.3.0 (with MET/CAL version 11.0.0) (.iso)Documents:MET/TEAM 3.3.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/CAL 11.0.0 Read Me (.pdf)Updating to METTEAM 3.3.0 and METCAL 11.0.0 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.3.0 release is a minor update to MET/TEAM software. The MET/CAL version 11.0.0 release is a major update to MET/CAL software. This update includes new features, improvements, bug fixes, and minor...

Release: MET/TEAM version 3.2.0 (with MET/CAL version 10.6.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.2.0 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from version 3.0.0, 3.1.0, or 3.1.1 directly to version 3.2.0.Upgrading from version 3.x.x of MET/TEAM will not require you to re-request your licenses.Upgrading...

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from either version 3.0.0 or 3.1.0 directly to version 3.1.1.Upgrading from version 3.0.0 or 3.1.0 of MET/TEAM will not require you to re-request your...

Release: MET/TEAM version 3.1.0 (with MET/CAL version 10.5.0) (.iso)Documents:MET/TEAM 3.1.0 Readme (.pdf)MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)Update Instructions for MET/TEAM 3.1.0 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.0 and MET/CAL version 10.5.0 release is a a major update to MET/TEAM and...

MS-PSWD is a service that MET/CAL, MET/TEAM, or 5500/CAL customers can purchase to get their systems password reestablished.

Achieve precise calibration for oscilloscopes up to 4GHz with the Fluke 9500C. Features Active Head Technology™ for efficient, automated multi-channel calibration.

PG7000 Ver 2.01 Embedded Software (.bin)TITLEVERUSE WITHPG7000™2.01PG7102, PG7302 or PG7601Instructions:TITLEVERUSE WITHPG7000™2.01PG7102, PG7302 or PG7601Instructions:-Ver 2.00 UsersYour PG7000™ time and date will not operate with Ver 2.01 until a hardware change is implemented.-Ver 1.0x UsersVer 2.01 is a major revision which should be accompanied by hardware changes. Contact a Fluke Calibration Authorized Service Center for additional information.Download the file. Run Winflash and select...

molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

molbox RFM™ v1.20d Embedded Software (.bin)TITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMTITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of...

IR Configuration Utility v1.0 (.exe)IR Configuration Utility v1.0Posted: 01/23/2009Description: The IR Configuration Utility is shipped with supported instruments. Supported instruments include the 4180 and 4181 Precision IR Calibrators.This software is free and does not require a serial number to be installed.Size: 13.9MB

IO Toolkit v1.0 (.exe)IO Toolkit (Model 9940)IO Toolkit v1.0Posted: 09/26/2008Description: The IO Toolkit is shipped with supported instruments. This version includes support for the new 1523 and 1524 series Readouts.This software is free and does not require a serial number to be installed.Size: 7.0MB

Interface-it v3.81 (.exe)Interface-it Temperature Calibration SoftwarePosted: 11/27/2007Description: This version includes drivers for the new 914x series Field Metrology Wells as well as 917x series Metrology Wells.Size: 2.2MB** INTERFACE-IT MAY NOT BE FULLY COMPATIBLE WITH WINDOWS® VISTA  & WINDOWS® 7 **Fluke Calibrations's Interface-it Software Version 3.81 allows nearly all our dry-wells, baths and controllers that are equipped with an RS-232 interface to be controlled remotely from a...

Download COMPASS® for PressureVersion 3 Releases3.00.43 (SP1) (2011.02.11)ADDCP-802Support PG7000 and PG9000 models that respond with FLUKE as the manufacturer.CHGCP-793An automated PG7000/PG9000 system with a PPC and AMH will use ATM as the minimum pressure when exercising in a test that is run in Absolute by ATM.3.00.42 (SP1) (2010.07.07)ADDCP-689Support alternate units of measure and temperature references for the Piston Cylinder effective area.ADDCP-775Added new instruments to the default database.CHGCP-786When...

CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

6270A Embedded Software, Update by USB (.zip)Additional Downloads:6270 PCM v104 USB (.zip)Click here to update by serial RS-232 port.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 6270AUpdating the PCM (Pressure...

6270A Embedded Software, Update by Serial RS-232 Port (.zip)Click here to update by USB.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the RS-232 serial port on the rear panel of the 6270AThe below procedure updates the main firmware. Updating...

Get step-by-step instructions on how to accurately calibrate a hygrometer or other humidity sensor including why it’s important, techniques, and tips.

To minimize plant downtime and keep operations up and running, follow this guidance to ensure smooth instrumentation calibration.

There are a few instruments used to perform infrared (IR) thermometer and IR imager calibration. These instruments fall into two categories, cavities and flat-plates. To calculate the uncertainty in using these instruments, the temperature uniformity must be known. This is especially true with flat-plates. This uncertainty may be given in an instrument’s specification. However, there is not a standardized test method to test the uniformity of a flat-plate calibrator as there is with other classes...

เมื่อแผงโซลาร์เซลล์มีอายุมากขึ้น มีสาเหตุที่เป็นไปได้หลายประการที่ทำให้ระบบมีประสิทธิภาพต่ำ สาเหตุบางอย่างอาจคาดว่าจะเกิดขึ้นได้ เช่น การสูญเสียจากดินหรือการเสื่อมสภาพของแผงในระยะยาว...

คุณต้องทราบระนาบของความเข้มแสงอาทิตย์ของแผงและอุณหภูมิของเซลล์เพื่อประเมินประสิทธิภาพของวงจรโซลาร์เซลล์โดยไม่คำนึงถึงวิธีการทดสอบ เพื่อให้แน่ใจว่าคุณสามารถแปลความความสัมพันธ์กระแส-แรงดัน...

ในการวิเคราะห์ความสัมพันธ์กระแส-แรงดัน (I-V Curve) ในระบบเซลล์แสงอาทิตย์ ให้ใช้เครื่องวัดความสัมพันธ์กระแส-แรงดัน (I-V Curve) เพื่อเปรียบเทียบโค้งที่วัดได้กับโค้งมาตรฐานหรือโค้งที่คาดการณ์...

ตัวเลือกที่ครบครันสำหรับการทดสอบความปลอดภัยและประสิทธิภาพของสถานีชาร์จรถไฟฟ้า AC

Conveyor maintenance must be efficient to avoid expensive, unplanned downtime. This is particularly important in industries like food and beverage production, logistics warehousing, automotive manufacturing, mining, and raw material handling. The Fluke ii910 Precision Acoustic Imager with MecQ™ Mode provides a modern solution. It can detect potential problems in conveyor systems before they worsen. This allows maintenance teams to take proactive steps and maximize system performance. Fluke MecQ™...

ชุดอุปกรณ์เสริมสายวัดทดสอบสำหรับการใช้งานในการตรวจหาและแก้ไขปัญหาสายไฟและวงจร

เรียนรู้เกี่ยวกับกล้องถ่ายภาพความร้อนสำหรับการตรวจสอบบ้านและอาคาร ค้นหาอุปกรณ์ถ่ายภาพความร้อนที่ดีที่สุดสำหรับ HVAC

เครื่องมือสำคัญหนึ่งเดียวสำหรับการติดตั้ง การตรวจสอบ และการทดสอบระบบเซลล์แสงอาทิตย์ คือแคลมป์มิเตอร์พลังงานแสงอาทิตย์ Fluke 393 FC ที่ได้มาตรฐานระดับ CAT III 1500 V/CAT IV 600 V สำหรับสภาพแวดล้อม CAT III เช่น การติดตั้งพลังงานแสงอาทิตย์

ใครเป็นผู้คิดค้นมัลติมิเตอร์ จากกัลวานอมิเตอร์และโวลต์มิเตอร์ไปจนถึงดิจิตอลมัลติมิเตอร์ที่มีการถ่ายภาพความร้อนและการทำงานแบบไร้สาย ประวัติรุ่นมัลติมิเตอร์ของ Fluke

การทดสอบการคายประจุไฟฟ้าบางส่วนและการตรวจสอบโดยใช้กล้องสร้างภาพจากเสียงสะท้อน Fluke ii910 ดูวิธีการทดสอบการคายประจุไฟฟ้าบางส่วน

คำจำกัดความของการคายประจุไฟฟ้าบางส่วน เรียนรู้ว่าการคายประจุไฟฟ้าบางส่วนเกิดขึ้นได้อย่างไร สาเหตุของการการคายประจุไฟฟ้าบางส่วน และการคายประจุไฟฟ้าบางส่วน 4 ประเภทหลัก

เพิ่มประสิทธิภาพสูงสุดให้กับเครื่องมือลมของคุณด้วยกล้องสร้างภาพจากเสียงสะท้อน Fluke ii900 วินิจฉัยปัญหาการลดลงของแรงดันและการไหลของอากาศในท่ออากาศอัดได้อย่างรวดเร็วและง่ายดาย

เรียนรู้การวินิจฉัยปัญหาคุณภาพของไฟฟ้าในระบบไฟฟ้ารุ่นเก่าโดยใช้มัลติมิเตอร์และออสซิโลสโคปของ Fluke

ดูความแตกต่างระหว่าง Fluke ii900 เปรียบเทียบกับ ii910 Acoustic Imager ในแง่ของทั้งคุณสมบัติเฉพาะและฟังก์ชันการทำงาน

ชุดตัวแปลงขั้วต่อในอุตสาหกรรม Fluke Networks

รีโมททดแทน ID #1 ของ Fluke Networks/ ตัวทำแผนผังสายไฟสำหรับ LinkIQ™

เทอร์โมมิเตอร์ IR และ เทอร์โมมิเตอร์สัมผัส แบบทูอินวัน พร้อมด้วยจอแสดงผลดอทเมตริกซ์แบบใหม่

The Ti400 IR Camera combined with the Fluke a3001 FC iFlex modules is a high performance cutting edge kit that helps you accurately troubleshoot issues and get you back online.

The Fluke 287 electronics multimeter allows you to log and zoom in on problems. Now compatible with the Fluke Connect mobile app.

Fluke 724: คือเครื่องมือที่เพียบพร้อมตามที่คุณต้องการเพื่อช่วยแก้ไขปัญหาและสอบเทียบอุณหภูมิ

Fluke Ti400 is perfect for professionals due to high-performance features, like LaserSharp® Auto Focus. Discover the speed and accuracy of this cutting-edge camera today. LaserSharp® Auto Focus tells you exactly where you are focusing – see how

Fluke 80 Series V Digital Multimeters: The Industrial Standard

Detect and record parameters including RMS average, transients, flicker and harmonics with Fluke VR1710 Single Phase Voltage Quality Recorder.

CV300 infrared window – less than 5 minute install and grounding, torture tested with quick-turn or security keyed access.

Coaxial Feed-through BNC Male to BNC Female Cable Terminator. Consists of Set of 2, 50Ohm, 1000V CAT III, Max Power 1W

CNX C3002 Modular DMM 2-Compartment Soft CaseCompatible with Fluke CNX Wireless Multimeter Inner pocket and carrying handle

CNX small modular Case C3001Compatible with wireless modules Fluke CNX

ROI for industrial energy efficiency programs. How manufacturing plants can identify energy waste, save on utilities, and industrial energy costs.

The electrical power issues that most frequently affect industrial plants include voltage sags and swells, harmonics, transients, and voltage and current unbalance. The proper tools to correct these issues include knowledge and electrical test instruments ideally suited for each task.

Fluke Energy Analyze Plus ซอฟต์แวร์แอปพลิเคชัน Fluke Energy Analyze Plus สำหรับการดาวน์โหลด วิเคราะห์ และรายงาน ใช้กับ Fluke 1730, 1732, 1734, 1736, 1738, 1742, 1746 และ 1748 ไฟล์เฟิร์มแวร์ Fluke 173x v2.4.1 (.bin) ขั้นตอนการอัปเดตขึ้นอยู่กับรุ่นการแก้ไขเฟิร์มแวร์ที่ติดตั้งไว้ในเครื่องมือ...

PowerLog Classic Application Software for the Fluke VR1710 (.exe) ซอฟต์แวร์ PowerLog Classic Application สำหรับใช้งานกับ Fluke 345, VR1710, 1735 และ 433/434/435 (เข้ากันได้กับ Windows Vista, 7, 8 และ 10) (01/2016) VR1710 Firmware Upgrade Tool vA1.34(.zip) (12/2016)

ซอฟต์แวร์แอปพลิเคชัน PowerLog Classic ซอฟต์แวร์แอปพลิเคชัน PowerLog Classic ใช้ร่วมกับ Fluke 345, VR1710, 1735 และ 433/434/435 (ทำงานร่วมกันได้กับ Windows Vista, 7, 8 และ 10) เครื่องมืออัปเกรดเฟิร์มแวร์ 1735 v3.1 (.exe) อัปเกรด Fluke 1735 ของคุณเป็นเฟิร์มแวร์ล่าสุด...

เฟิร์มแวร์ของเครื่องวัดการสั่นสะเทือน Fluke 805 v3.0.5 (.bin) สร้างกลุ่มสินทรัพย์ สินทรัพย์ และจุดทดสอบอย่างรวดเร็วโดยใช้การนำเข้าเทมเพลตในเว็บแอป Fluke Connect™ ส่งใบสั่งงานและเส้นทางไปยัง 805 FC ของคุณโดยตรงโดยใช้แอปมือถือ...

Fluke 805 Vibration Meter Firmware and Trending TemplateTo copy the template:Turn on the PC or Laptop and copy the template you have downloaded from the link above.To export data:Connect the USB cable between the PC and the Meter. Turn on the Meter. A pop-up menu opens to show that the new hardware is found. -OR-Go to My Computer and select the removable disk that is the Meter. Double-click to see the contents of the disk.Make a copy of the TXT-format file from the Meter to the PC or Laptop.To...