Zoekresultaten

To establish pressures using a DWT or piston gauge, you need to account for the acceleration of gravity where the instrument is operated. Learn more.

You’ll want to test thermocouples at regular calibration intervals & if you suspect them of failing to meet performance specifications. Learn how here.

A typical 3-point calibration of 4 tri-clamp sanitary sensors takes over 4 hours (259.45 minutes) using a 7103 Micro-Bath. The same calibration using a 7109A Portable Calibration Bath takes about 2 hours (130.0 minutes). That’s a time savings of more than 2 hours per 4-sensor batch!

EN 50191, Electrical Safety Testing Standard for the Erection and Operation of Electrical Test Equipment

See the benefits of upgrading the GE Druck PACE 6000 to the Fluke 6270A & learn steps for configuring and installing the 6270A. Get the details here.

This application note summarizes some of the benefits of upgrading to the 6270A, as well as detailing the steps for configuring and installing the 6270A as a replacement to the PACE 5000.

If you’re in the market for an isothermal bath (temperature calibration bath), you may have already noticed that many suppliers provide technical specifications that are confusing or incomplete. Read this short article to learn 4 key specifications to review to help make the best decision and avoid a mistake.

This Resource Center is designed to help you easily see which Fluke Calibration pressure controller is the recommended replacement for your existing older controller.

Read this short blog post to see how Fluke Calibration contributes in this year's World Metrology Day theme, “Measurements and Light”.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Having the latest version of MET/CAL software gives you access to many new features and functions. Here are just a few examples of the additional capabilities added with each new update.

It's obsolete and the manufacturer doesn't support it anymore.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

A modular pressure controller / calibrator is likely best if you calibrate a wide work load, your work load changes, or you can’t afford downtime. Learn more.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Why calibrate test equipment? What makes it go out of cal? What happens when you send equipment for calibration? When should you calibrate? Learn here.

Fluke Calibration manufactures platinum resistance thermometers, thermocouples, thermistor temperature sensors for precision temperature measurement and calibration

A temperature calibrator, often called a thermometer calibrator, is used to remove inaccuracies in installed thermometers and temperature sensors, because temperature measurement is a critical parameter in many industrial processes.

A platinum resistance thermometer (PRT) is a thermometer constructed from a high purity platinum element (wire-wound coil or thin film) placed in a tube of metal or glass and sealed with an inert atmosphere and/or mineral insulator.

Fluke Calibration manufactures leading primary temperature standards including ITS-90 SPRTs, ITS-90 fixed point cells, water triple point cells, & maintenance apparatus. Learn more.

Precision thermometer readout from Fluke Calibration is easy to use, very accurate, and designed for calibration. Contact us today for more information.

Installing MET/TEMP IICan MET/TEMP II be installed on computers running Windows® Vista?When I install MET/TEMP II, I am prompted to enter a serial number. Where do I find my serial number?I downloaded MET/TEMP II from the internet and installed the demo version. Now I want to buy it and start using it. What do I need to do?I am currently a Fluke MET/TEMP software user. What do I need to know about upgrading to MET/TEMP II?I am currently a Calibrate-it and Generate-it user. What do I need to know...

The demo version comes with a demo license that allows up to two concurrent clients to connect

MET/TEMP II is intended to replace Fluke's MET/TEMP software. MET/TEMP II is a completely different software package than MET/TEMP

Most calibration procedures require comparison of the device under test (DUT) and calibration standard at multiple pressure points across the DUT’s range.

Quick Links-Download Demos, Updates, Service Releases, etc.Technical SupportQuestions about Fluke Calibration Temperature software? This page answers some of the most common questions concerning our software products.All Fluke Calibration temperature calibration software:Q. What version of Windows® is required to run Fluke Calibration Temperature software?A. Please refer to the table below for Windows® compatibility information for the latest version of each software indicated: Software \ Windows®98/98SENT4...

A40 / A40A current shunt from Fluke Calibration enables ac / dc current transfer measurements & operates in the frequency range of 5Hz to 100Khz. Get a quote.

525B temperature/pressure calibrator is the most accurate Fluke Calibration temperature calibrator & also provides high accuracy for pressure calibration.

Nieuwere technologie kan u helpen om aan de voorschriften te voldoen, nauwkeuriger gegevens te verzamelen en uw veiligheid te waarborgen. Hier volgen belangrijke redenen om nu te upgraden.

MET/TEMP II Software Download (.exe)TITLEVERLinksMET/TEMP II5.2Product PageDescriptionWhen downloaded, this file can be run to install MET/TEMP II. There is no free demo/trial version of 5.2. In order to install MET/TEMP II v5.2, you must purchase the software and obtain a serial number. The installation process prompts you to enter the serial number. Version 5.2 does not accept serial numbers from previous versions of MET/TEMP II. The serial number will be located on a sticker on the CD pouch....

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)Documents:MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/TEAM 3.1.1 Readme (.pdf)Update Instructions for MET/TEAM 3.1.1 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You...

MET/TEAM version 2.2 (with MET/CAL version 9.1) (.iso)Documents:MET/CAL 9.1.0 Readme (.pdf)MET/TEAM 2.2.0 Readme (.pdf)Updating to MET/TEAM 2.2 and MET/CAL 9.1 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThere has been a major change to the MET/TEAM database which means updating to version 2.2 is a multistep process that could take from 8 to 24 hours depending on your database, server configuration, and network environment.There has been a major change to MET/CAL regarding...

Fluke DAQ Software (.zip)Discontinued ProductThis product has been discontinued. The download is still available for existing users to download for installation as necessary.DescriptionFluke DAQ 6.0.4 application software for use with Fluke data acquisition and temperature scanning products (2638A, 1586A, 2640A, 2645A, 2680A, 2686A). Version 6.04 is an update to Version 6.03.Evaluation Mode:Without an activation key this program will run for 40-hours of cumulative run-time in Evaluation (DEMO) mode....

COMPASS for Pressure Basic (.exe)Additional Downloads:COMPASS for Pressure Basic, Demo (.exe)COMPASS for Pressure Basic, Upgrade (.exe)COMPASS for Pressure Enhanced (.exe)COMPASS for Pressure Enhanced, Demo (.exe)COMPASS for Pressure Enhanced, Upgrade (.exe)TITLEVERUSE WITHDOCUMENTSCOMPASS®for Pressure™5.2.102024.05.21FPG8601, PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCH, PPCK, PPCK+, RPM3, RPM4, 7050, 7052, 7250, 7252, 7350, 7615, 7750, 7010, 7215, 2465, 2456, 2271A, 6270A, 8270A, 8370A,Third...

Update: MET/CAL version 10.6.2 for MET/TEAM version 3.2.0 (.zip)Documents:Accuracy Files for Fluke 5540A, 5550A, and 5560A (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers:MET/CAL version 10.6.2 release is an update to previous MET/CAL software. This update includes new Instrument FSCs for the Fluke 5560A, 5550A, and 5540A calibrators and bug fixes.Do not manually uninstall the previous version. If you do this...

Update: MET/CAL version 10.6.2 for MET/CONNECT version 2.1.0 (.zip)Documents:Accuracy Files for Fluke 5540A, 5550A, and 5560A (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available here.Current MET/CONNECT Customers:MET/CAL version 10.6.2 release is an update to previous MET/CAL software. This update includes new Instrument FSCs for the Fluke 5560A, 5550A, and 5540A calibrators and bug fixes.Do not manually uninstall the previous version. If you do this...

Update: MET/CAL version 10.6.1 for MET/TEAM version 3.2.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers:MET/CAL version 10.6.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime...

Update: MET/CAL version 10.6.1 for MET/CONNECT version 2.1.0 (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available here.Current MET/CONNECT Customers:MET/CAL version 10.6.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime...

Update: MET/CAL version 10.5.1 for MET/TEAM version 3.1.1 or 3.1.0 (.zip)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers:MET/CAL version 10.5.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime and/or MET/CAL Editor on any workstations, be...

Update: MET/CAL version 10.5.0 for MET/CONNECT version 2.0.0 (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available with the MET/TEAM 3.1.0 installer.Current MET/CONNECT Customers:MET/CAL version 10.5.0 release is an update to previous MET/CAL software. This update includes new features, bug fixes, and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and...

Update: MET/CAL version 10.4.0 for MET/TEAM version 3.0.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available with the MET/CONNECT 2.0.0 installer.Current MET/TEAM Customers:MET/CAL version 10.4.0 release is an update to previous MET/CAL software. This update includes new features, bug fixes, and minor updates.You must install MET/TEAM version 3.0.0 Hot Fix 2 to use MET/CAL 10.4.0.Do not manually uninstall the previous version. If you do this...

Update: MET/CAL version 10.2.2 for MET/TEAM version 3.0.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available with the MET/CONNECT 1.2.0 installer.Current MET/TEAM Customers:MET/CAL version 10.2.2 release is an update to previous MET/CAL software. This update includes bug fixes and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you...

Update: MET/CAL version 10.1.1 for MET/TEAM 2.3.0 (.zip)Documents:MET/CAL 10.1.1 Readme (.pdf)This update does not impact MET/CONNECT Customers. It includes the existing Hot Fix for MET/CAL version 10.1.0.Current MET/TEAM Customers:MET/CAL version 10.1.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If...

TableWare v2.4 Working Demo (.exe)TableWare v2.4 Working DemoPosted: 09/29/2005Description: The TableWare Working Demo does everything the actual software does, except actually calculate coefficients from raw data. The coefficients used by the working demo are generic and serve only to demonstrate the capabilities of the software.Serial Number to Install Demo Version: DEMOSize: 2.1MBUpgrade TableWare V2.x to v2.4Posted: 09/29/2005Description: Upgrades TableWare v2.x to version 2.4.  A serial number...

RPM4-AD v1.00f Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-AD™1.00f2010.12.28RPM4-ADDo NOT use with NON "-AD" (Air Data)RPM4 ModelsInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

RPM4 v1.01I Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4™1.01I2019.04.28RPM4Note: If you have a special RPM4model use these links:RPM4-AD™RPM4-AF™RPM4-E-DWT A70M/A7M-AF™RPM4-E-DWT™Please contact our Calibration and Repair department at 602.773.4782 if you recently upgraded to version 1.01f or plan to upgrade from 1.01f to another version. The upgrade path from 1.01f may cause a potentially significant metrological error.Instructions:Download the file.Run Winflash and select...

RPM3 v1.02j Embedded Software (.bin)TITLEVERUSE WITHRPM3™1.02j2005.06.27RPM3Instructions:Do Not use with HGC-30000-AF!Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires...

Release: MET/TEAM version 3.3.0 (with MET/CAL version 11.0.0) (.iso)Documents:MET/TEAM 3.3.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/CAL 11.0.0 Read Me (.pdf)Updating to METTEAM 3.3.0 and METCAL 11.0.0 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.3.0 release is a minor update to MET/TEAM software. The MET/CAL version 11.0.0 release is a major update to MET/CAL software. This update includes new features, improvements, bug fixes, and minor...

Release: MET/TEAM version 3.2.0 (with MET/CAL version 10.6.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.2.0 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from version 3.0.0, 3.1.0, or 3.1.1 directly to version 3.2.0.Upgrading from version 3.x.x of MET/TEAM will not require you to re-request your licenses.Upgrading...

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from either version 3.0.0 or 3.1.0 directly to version 3.1.1.Upgrading from version 3.0.0 or 3.1.0 of MET/TEAM will not require you to re-request your...

Release: MET/TEAM version 3.1.0 (with MET/CAL version 10.5.0) (.iso)Documents:MET/TEAM 3.1.0 Readme (.pdf)MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)Update Instructions for MET/TEAM 3.1.0 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.0 and MET/CAL version 10.5.0 release is a a major update to MET/TEAM and...

MS-PSWD is a service that MET/CAL, MET/TEAM, or 5500/CAL customers can purchase to get their systems password reestablished.

Achieve precise calibration for oscilloscopes up to 4GHz with the Fluke 9500C. Features Active Head Technology™ for efficient, automated multi-channel calibration.

PG7000 Ver 2.01 Embedded Software (.bin)TITLEVERUSE WITHPG7000™2.01PG7102, PG7302 or PG7601Instructions:TITLEVERUSE WITHPG7000™2.01PG7102, PG7302 or PG7601Instructions:-Ver 2.00 UsersYour PG7000™ time and date will not operate with Ver 2.01 until a hardware change is implemented.-Ver 1.0x UsersVer 2.01 is a major revision which should be accompanied by hardware changes. Contact a Fluke Calibration Authorized Service Center for additional information.Download the file. Run Winflash and select...

molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

molbox RFM™ v1.20d Embedded Software (.bin)TITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMTITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of...

IR Configuration Utility v1.0 (.exe)IR Configuration Utility v1.0Posted: 01/23/2009Description: The IR Configuration Utility is shipped with supported instruments. Supported instruments include the 4180 and 4181 Precision IR Calibrators.This software is free and does not require a serial number to be installed.Size: 13.9MB

IO Toolkit v1.0 (.exe)IO Toolkit (Model 9940)IO Toolkit v1.0Posted: 09/26/2008Description: The IO Toolkit is shipped with supported instruments. This version includes support for the new 1523 and 1524 series Readouts.This software is free and does not require a serial number to be installed.Size: 7.0MB

Interface-it v3.81 (.exe)Interface-it Temperature Calibration SoftwarePosted: 11/27/2007Description: This version includes drivers for the new 914x series Field Metrology Wells as well as 917x series Metrology Wells.Size: 2.2MB** INTERFACE-IT MAY NOT BE FULLY COMPATIBLE WITH WINDOWS® VISTA  & WINDOWS® 7 **Fluke Calibrations's Interface-it Software Version 3.81 allows nearly all our dry-wells, baths and controllers that are equipped with an RS-232 interface to be controlled remotely from a...

Download COMPASS® for PressureVersion 3 Releases3.00.43 (SP1) (2011.02.11)ADDCP-802Support PG7000 and PG9000 models that respond with FLUKE as the manufacturer.CHGCP-793An automated PG7000/PG9000 system with a PPC and AMH will use ATM as the minimum pressure when exercising in a test that is run in Absolute by ATM.3.00.42 (SP1) (2010.07.07)ADDCP-689Support alternate units of measure and temperature references for the Piston Cylinder effective area.ADDCP-775Added new instruments to the default database.CHGCP-786When...

CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

6270A Embedded Software, Update by USB (.zip)Additional Downloads:6270 PCM v104 USB (.zip)Click here to update by serial RS-232 port.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 6270AUpdating the PCM (Pressure...

6270A Embedded Software, Update by Serial RS-232 Port (.zip)Click here to update by USB.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the RS-232 serial port on the rear panel of the 6270AThe below procedure updates the main firmware. Updating...

Get step-by-step instructions on how to accurately calibrate a hygrometer or other humidity sensor including why it’s important, techniques, and tips.

If you are purchasing a calibrator to calibrate pressure measurement devices, follow these 2 simple steps to ensure you get what you need.

There are a few instruments used to perform infrared (IR) thermometer and IR imager calibration. These instruments fall into two categories, cavities and flat-plates. To calculate the uncertainty in using these instruments, the temperature uniformity must be known. This is especially true with flat-plates. This uncertainty may be given in an instrument’s specification. However, there is not a standardized test method to test the uniformity of a flat-plate calibrator as there is with other classes...

Naarmate PV-arrays verouderen, zijn er veel mogelijke oorzaken voor onvoldoende presterende systemen. Sommige zijn te verwachten, zoals verliezen door vervuiling of achteruitgang van de array op de lange termijn. Sommige kunnen onverwacht zijn, zoals een storing in de bypass-diode, gebarsten modules, enzovoort. Omdat I-V-curvetracers alle stroom- en spanningspunten van een PV-bron registreren, zijn ze uniek in staat om symptomen van onderprestaties in PV-systemen te identificeren. Elk gegevensblad...

U moet het vlak van arraystraling en de celtemperatuur kennen om de prestaties van PV-circuits te kunnen beoordelen, ongeacht de testmethode. Om ervoor te zorgen dat u de I-V-curven nauwkeurig kunt interpreteren, moet u rekening houden met omgevingsomstandigheden, aangezien snelle veranderingen in de straling of celtemperatuur fouten kunnen veroorzaken bij het testen van I-V-curven. Voor betrouwbare resultaten moeten de juiste sensoren en testmethoden worden gebruikt, zoals de Fluke Solmetric PVA...

.super-custom html { font-family: sans-serif; -ms-text-size-adjust: 100%; -webkit-text-size-adjust: 100%; font-size: 10px; -webkit-tap-highlight-color: transparent } .super-custom body { font-family: "Helvetica Neue",Helvetica,Arial,sans-serif;font-size:14px;line-height:1.42857143;color:#333;background-color:#fff;margin:0}.super-custom article, .super-custom aside, .super-custom details, .super-custom figcaption, .super-custom figure, .super-custom footer, .super-custom header, .super-custom hgroup,...

Voor het analyseren van I-V-curven in fotovoltaïsche systemen gebruikt u een I-V-curvetracer om gemeten curven te vergelijken met standaard of voorspelde curven, waarbij rekening wordt gehouden met omgevingsinvloeden zoals schaduw of temperatuur. Het “Schema voor probleemoplossing van PV-arrays” is een uitgebreide handleiding die is ontwikkeld op basis van ruime praktijkervaring, beoordelingen van literatuur over de betrouwbaarheid van PV-modules en deskundige input van het National Renewable...

Complete oplossing voor veiligheids- en prestatietests van AC EV-laadstations voor elektrische voertuigen

Meetsnoer-accessoireset speciaal voor het opsporen van draden, kabels en circuits en het oplossen van storingen.

Meer informatie over warmtebeeldcamera's voor gebouw- en woninginspecties. Zoek de beste warmtebeeldcamera voor HVAC.

De Fluke 393 FC-stroomtang voor zonne-energie is een essentieel instrument voor het installeren, bewaken en testen van fotovoltaïsche systemen. De meter heeft de specificaties CAT III 1500 V/CAT IV 600 V voor CAT III-omgevingen, inclusief zonne-energie-installaties.

Wie heeft de multimeter uitgevonden? Van galvanometers en voltmeters tot digitale multimeters met warmtebeeldtechniek en draadloze functionaliteit. Geschiedenis van Fluke-multimetermodellen.

Deelontlading testen en bewaken met een Fluke ii910 akoestische beeldvormingscamera. Ontdek hoe u een deelontladingstest uitvoert.

Definitie deelontlading. Lees hoe deelontlading plaatsvindt, wat de oorzaken van deelontlading zijn en wat de 4 hoofdtypen deelontlading zijn.

Maximaliseer de prestaties van uw pneumatische instrumenten met de Fluke ii900 Acoustic Imager. Stel snel en eenvoudig een diagnose van de drukval en de luchtstroom in persluchtleidingen.

Bekijk de verschillen tussen de akoestische beeldcamera's van de Fluke ii900 en ii910 in termen van specificaties en functionaliteit.

The DewK measures temperature to ±0.125 °C and humidity to ±1.5% on two channels, and displays it on a big, clear screen.

The 9143 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

The 9142 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

The 1502A and 1504 reference thermometers will read RTDs, PRDs, and thermistor sensors. Primary temperature standards, secondary temperature standards, fixed-point cells, water triple points, SPRTs, calibration baths, dry-block calibrators and temperature metrology training can also be found on this site.

Verminder met de TiX560 warmtebeeldcamera en een 2x-telelens de noodzaak om de gevarenzone te betreden of hoge ladders te beklimmen om kritische infrarooddetails vast te leggen.

De Fluke Ti300 wordt geleverd inclusief LaserSharp® Auto Focus, heeft een robuust ontwerp en is gebouwd om elke omgeving aan te kunnen. Blijf volledig up-to-date met deze Fluke-infraroodcamera.

Fluke Ti400 infraroodcamera

De grootste investering van een bedrijf is niet de apparatuur achter de deur van het paneel; de hoogste prioriteit heeft de bescherming van de elektriciens, technici en inspecteurs die elke dag tijdens hun werk hun leven riskeren.

FlukeView software adds PC power to your Fluke ScopeMeter test tool

De i3000s Flex is een AC-stroomtang die volgens het Rogowskiprincipe werkt.

Geschikt voor Fluke CNX draadloze multimeter met binnenvak en draaggreep

Geschikt voor Fluke CNX draadloze modules en de Fluke CNX C3000 premium modulaire gereedschapstas.

Een diode is een halfgeleideronderdeel dat een soort eenrichtingsschakelaar voor stroom vormt.

Het identificeren van energieverspilling door bewaking en beheer van de netvoedingskwaliteit. Ontdek energiebesparingsmogelijkheden die ook ernstige storingen en onderbrekingen kunnen voorkomen.

Fluke Energy Analyze Plus  Fluke Energy Analyze Plus applicatiesoftware voor downloaden, analyseren en rapportage. Voor gebruik met Fluke 1730, 1732, 1734, 1736, 1738, 1742, 1746 en 1748. Fluke 173x v2.4.1 firmwarebestand (.bin) De updateprocedure is afhankelijk van de firmwarerevisie die momenteel op het instrument is geïnstalleerd. Om instrumenten met firmwarerevisie 2.0 bij te werken, slaat u het binaire bestand van de firmware op in een map “Fluke173x”. Om 1736-instrumenten met een firmwareversie...

PowerLog Classic-applicatiesoftware voor de Fluke VR1710 (.exe) PowerLog Classic-applicatiesoftware wordt gebruikt met de Fluke 345, VR1710, 1735 en 433/434/435. (Compatibel met Windows Vista, 7, 8 en 10). (01-2016) VR1710 firmware-upgradetool vA1.34 (.zip) (12-2016)

PowerLog Classic applicatiesoftware PowerLog Classic applicatiesoftware voor gebruik met Fluke 345, VR1710, 1735 en 433/434/435. (Compatibel met Windows Vista, 7, 8 en 10). 1735 Firmware upgradetools v3.1 (.exe) Upgrade uw Fluke 1735 naar de nieuwste firmware. (Compatibel met Vista) 1735 Firmware v1.10 (.zip) Dit bestand moet worden uitgepakt en gebruikt in combinatie met de firmware-upgradetools V3.1 (hierboven). Laatst bijgewerkt op 08-2014 OPMERKING: voor firmware van v1.10 is PowerLog Classic...

Fluke 805 trillingsmeter-firmware v3.0.5 (.bin) Maak snel materiaalgroepen, materiaal en testpunten met de importeersjabloon in de Fluke Connect™-webapp. Leid werkorders en routes rechtstreeks naar uw 805 FC via de mobiele Fluke Connect™-app. Stel machineprofielen op en bewerk ze met de mobiele Fluke Connect-app. Leid ze vervolgens naar uw 805 FC. Koppel testresultaten automatisch aan machineprofielen. De meter upgraden: Download het upgrade-bestand voor de meter door op de bovenstaande koppeling...

Vibration Software Downloads