Hasil pencarian

To establish pressures using a DWT or piston gauge, you need to account for the acceleration of gravity where the instrument is operated. Learn more.

You’ll want to test thermocouples at regular calibration intervals & if you suspect them of failing to meet performance specifications. Learn how here.

EN 50191, Electrical Safety Testing Standard for the Erection and Operation of Electrical Test Equipment

This application note summarizes some of the benefits of upgrading to the 6270A, as well as detailing the steps for configuring and installing the 6270A as a replacement to the PACE 5000.

If you’re in the market for an isothermal bath (temperature calibration bath), you may have already noticed that many suppliers provide technical specifications that are confusing or incomplete. Read this short article to learn 4 key specifications to review to help make the best decision and avoid a mistake.

This Resource Center is designed to help you easily see which Fluke Calibration pressure controller is the recommended replacement for your existing older controller.

While there’s no “one size fits all” answer, see this post for helpful guidelines on how often you should calibrate thermometers, test equipment, multimeters, etc.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Having the latest version of MET/CAL software gives you access to many new features and functions. Here are just a few examples of the additional capabilities added with each new update.

It's obsolete and the manufacturer doesn't support it anymore.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Why calibrate test equipment? What makes it go out of cal? What happens when you send equipment for calibration? When should you calibrate? Learn here.

Fluke Calibration manufactures platinum resistance thermometers, thermocouples, thermistor temperature sensors for precision temperature measurement and calibration

A temperature calibrator, often called a thermometer calibrator, is used to remove inaccuracies in installed thermometers and temperature sensors, because temperature measurement is a critical parameter in many industrial processes.

Fluke Calibration manufactures leading primary temperature standards including ITS-90 SPRTs, ITS-90 fixed point cells, water triple point cells, & maintenance apparatus. Learn more.

Precision thermometer readout from Fluke Calibration is easy to use, very accurate, and designed for calibration. Contact us today for more information.

Quick Links-Download Demos, Updates, Service Releases, etc.Technical SupportQuestions about Fluke Calibration Temperature software? This page answers some of the most common questions concerning our software products.All Fluke Calibration temperature calibration software:Q. What version of Windows® is required to run Fluke Calibration Temperature software?A. Please refer to the table below for Windows® compatibility information for the latest version of each software indicated: Software \ Windows®98/98SENT4...

A40 / A40A current shunt from Fluke Calibration enables ac / dc current transfer measurements & operates in the frequency range of 5Hz to 100Khz. Get a quote.

Annual global event highlights why measurement matters in everyday lifeEverett, Wash., May 20, 2013 – On May 20th, scientists and organizations dedicated to metrology celebrate World Metrology Day, which commemorates the signing of the international treaty to coordinate weights and measures activities and support the development of the metric system. Fluke Corporation recognizes World Metrology Day as a time to appreciate the scientists in national laboratories throughout the world who dedicate...

525B temperature/pressure calibrator is the most accurate Fluke Calibration temperature calibrator & also provides high accuracy for pressure calibration.

Teknologi lebih baru dapat membantu Anda tetap patuh, mengumpulkan data yang lebih akurat, dan membuat Anda lebih aman. Berikut ini alasan utama untuk memutakhirkan sekarang.

MET/TEMP II Software Download (.exe)TITLEVERLinksMET/TEMP II5.2Product PageDescriptionWhen downloaded, this file can be run to install MET/TEMP II. There is no free demo/trial version of 5.2. In order to install MET/TEMP II v5.2, you must purchase the software and obtain a serial number. The installation process prompts you to enter the serial number. Version 5.2 does not accept serial numbers from previous versions of MET/TEMP II. The serial number will be located on a sticker on the CD pouch....

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)Documents:MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/TEAM 3.1.1 Readme (.pdf)Update Instructions for MET/TEAM 3.1.1 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You...

MET/TEAM version 2.2 (with MET/CAL version 9.1) (.iso)Documents:MET/CAL 9.1.0 Readme (.pdf)MET/TEAM 2.2.0 Readme (.pdf)Updating to MET/TEAM 2.2 and MET/CAL 9.1 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThere has been a major change to the MET/TEAM database which means updating to version 2.2 is a multistep process that could take from 8 to 24 hours depending on your database, server configuration, and network environment.There has been a major change to MET/CAL regarding...

Fluke DAQ Software (.zip)Discontinued ProductThis product has been discontinued. The download is still available for existing users to download for installation as necessary.DescriptionFluke DAQ 6.0.4 application software for use with Fluke data acquisition and temperature scanning products (2638A, 1586A, 2640A, 2645A, 2680A, 2686A). Version 6.04 is an update to Version 6.03.Evaluation Mode:Without an activation key this program will run for 40-hours of cumulative run-time in Evaluation (DEMO) mode....

COMPASS for Pressure Basic (.exe)Additional Downloads:COMPASS for Pressure Basic, Demo (.exe)COMPASS for Pressure Basic, Upgrade (.exe)COMPASS for Pressure Enhanced (.exe)COMPASS for Pressure Enhanced, Demo (.exe)COMPASS for Pressure Enhanced, Upgrade (.exe)TITLEVERUSE WITHDOCUMENTSCOMPASS®for Pressure™5.2.102024.05.21FPG8601, PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCH, PPCK, PPCK+, RPM3, RPM4, 7050, 7052, 7250, 7252, 7350, 7615, 7750, 7010, 7215, 2465, 2456, 2271A, 6270A, 8270A, 8370A,Third...

Update: MET/CAL version 10.6.2 for MET/TEAM version 3.2.0 (.zip)Documents:Accuracy Files for Fluke 5540A, 5550A, and 5560A (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers:MET/CAL version 10.6.2 release is an update to previous MET/CAL software. This update includes new Instrument FSCs for the Fluke 5560A, 5550A, and 5540A calibrators and bug fixes.Do not manually uninstall the previous version. If you do this...

Update: MET/CAL version 10.6.2 for MET/CONNECT version 2.1.0 (.zip)Documents:Accuracy Files for Fluke 5540A, 5550A, and 5560A (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available here.Current MET/CONNECT Customers:MET/CAL version 10.6.2 release is an update to previous MET/CAL software. This update includes new Instrument FSCs for the Fluke 5560A, 5550A, and 5540A calibrators and bug fixes.Do not manually uninstall the previous version. If you do this...

Update: MET/CAL version 10.6.1 for MET/TEAM version 3.2.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers:MET/CAL version 10.6.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime...

Update: MET/CAL version 10.6.1 for MET/CONNECT version 2.1.0 (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available here.Current MET/CONNECT Customers:MET/CAL version 10.6.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime...

Update: MET/CAL version 10.5.1 for MET/TEAM version 3.1.1 or 3.1.0 (.zip)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers:MET/CAL version 10.5.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime and/or MET/CAL Editor on any workstations, be...

Update: MET/CAL version 10.5.0 for MET/CONNECT version 2.0.0 (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available with the MET/TEAM 3.1.0 installer.Current MET/CONNECT Customers:MET/CAL version 10.5.0 release is an update to previous MET/CAL software. This update includes new features, bug fixes, and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and...

Update: MET/CAL version 10.4.0 for MET/TEAM version 3.0.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available with the MET/CONNECT 2.0.0 installer.Current MET/TEAM Customers:MET/CAL version 10.4.0 release is an update to previous MET/CAL software. This update includes new features, bug fixes, and minor updates.You must install MET/TEAM version 3.0.0 Hot Fix 2 to use MET/CAL 10.4.0.Do not manually uninstall the previous version. If you do this...

Update: MET/CAL version 10.2.2 for MET/TEAM version 3.0.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available with the MET/CONNECT 1.2.0 installer.Current MET/TEAM Customers:MET/CAL version 10.2.2 release is an update to previous MET/CAL software. This update includes bug fixes and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you...

Update: MET/CAL version 10.1.1 for MET/TEAM 2.3.0 (.zip)Documents:MET/CAL 10.1.1 Readme (.pdf)This update does not impact MET/CONNECT Customers. It includes the existing Hot Fix for MET/CAL version 10.1.0.Current MET/TEAM Customers:MET/CAL version 10.1.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If...

TableWare v2.4 Working Demo (.exe)TableWare v2.4 Working DemoPosted: 09/29/2005Description: The TableWare Working Demo does everything the actual software does, except actually calculate coefficients from raw data. The coefficients used by the working demo are generic and serve only to demonstrate the capabilities of the software.Serial Number to Install Demo Version: DEMOSize: 2.1MBUpgrade TableWare V2.x to v2.4Posted: 09/29/2005Description: Upgrades TableWare v2.x to version 2.4.  A serial number...

RPM4-AD v1.00f Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-AD™1.00f2010.12.28RPM4-ADDo NOT use with NON "-AD" (Air Data)RPM4 ModelsInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

RPM4 v1.01I Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4™1.01I2019.04.28RPM4Note: If you have a special RPM4model use these links:RPM4-AD™RPM4-AF™RPM4-E-DWT A70M/A7M-AF™RPM4-E-DWT™Please contact our Calibration and Repair department at 602.773.4782 if you recently upgraded to version 1.01f or plan to upgrade from 1.01f to another version. The upgrade path from 1.01f may cause a potentially significant metrological error.Instructions:Download the file.Run Winflash and select...

RPM3 v1.02j Embedded Software (.bin)TITLEVERUSE WITHRPM3™1.02j2005.06.27RPM3Instructions:Do Not use with HGC-30000-AF!Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires...

Release: MET/TEAM version 3.3.0 (with MET/CAL version 11.0.0) (.iso)Documents:MET/TEAM 3.3.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/CAL 11.0.0 Read Me (.pdf)Updating to METTEAM 3.3.0 and METCAL 11.0.0 (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.3.0 release is a minor update to MET/TEAM software. The MET/CAL version 11.0.0 release is a major update to MET/CAL software. This update includes new features, improvements, bug fixes, and minor...

Release: MET/TEAM version 3.2.0 (with MET/CAL version 10.6.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.2.0 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from version 3.0.0, 3.1.0, or 3.1.1 directly to version 3.2.0.Upgrading from version 3.x.x of MET/TEAM will not require you to re-request your licenses.Upgrading...

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from either version 3.0.0 or 3.1.0 directly to version 3.1.1.Upgrading from version 3.0.0 or 3.1.0 of MET/TEAM will not require you to re-request your...

Release: MET/TEAM version 3.1.0 (with MET/CAL version 10.5.0) (.iso)Documents:MET/TEAM 3.1.0 Readme (.pdf)MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)Update Instructions for MET/TEAM 3.1.0 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.0 and MET/CAL version 10.5.0 release is a a major update to MET/TEAM and...

MS-PSWD is a service that MET/CAL, MET/TEAM, or 5500/CAL customers can purchase to get their systems password reestablished.

In the unlikely event that you experience corrupt data when using MET/CAL® Plus calibration management software, we may be able to help.

Release: MET/CAL version 10.1.0 for MET/TEAM 2.3.0 (.zip)Current MET/TEAM Customers:MET/CAL version 10.1.0 release is an update to previous MET/CAL software. This update includes bug fixes and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime and/or MET/CAL Editor on any workstations, be sure to run the MET/CAL Client installer on all MET/CAL workstations...

PPC4E v1.2.6.15 Embedded Software (.bin)TITLEVERUSE WITHPPC4E™1.2.6.15PPC4EInstructions:Download the file by clicking on "PPC4E v1.2.6.15.bin".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it...

PPC4 v1.2.6.14 Embedded Software (.bin)TITLEVERUSE WITHPPC4™1.2.6.14PPC4 (including -AF models)Instructions:Download the file by clicking on "PPC4 v1.2.6.14.bin".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

PPC2-AF v1.01e Embedded Software (.bin)TITLEVERUSE WITHPPC3™1.03d2011.10.21PPC3 (including -AF models)Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should only be performed after...

PPC2-AF v1.01e Embedded Software (222.5 KB)TITLEVERUSE WITHPPC2-AF™1.01e2006.11.17PPC2-AFTITLEVERUSE WITHPPC2-AF™1.01e2006.11.17PPC2-AFInstructions:Do Not use with PPC2+!This software revision affects only the PPC2-AF on-board routines for calibration of the PPC2-AF's RPTs. It has no effect on regular operation. This new release is recommended for all PPC2-AF units, in particular those on which difficulty with calibration of the Lo Reference Pressure Transducer has been encountered. The FCAL...

Achieve precise calibration for oscilloscopes up to 4GHz with the Fluke 9500C. Features Active Head Technology™ for efficient, automated multi-channel calibration.

molbox1+ or molbox1+S v6.01 Embedded Software (.bin)TITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+STITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+SThis flash is intended ONLY for molbox1+ or molbox1+S with the Fluke Calibration logo: on the front panel, serial number 2000 and above. Attempted use on any other molbox will result in an inoperable molbox unless the molbox1 hardware is upgraded to a molbox1+.For a molbox1 WITHOUT the Fluke Calibration logo,...

molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

molbox RFM™ v1.20d Embedded Software (.bin)TITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMTITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of...

IR Configuration Utility v1.0 (.exe)IR Configuration Utility v1.0Posted: 01/23/2009Description: The IR Configuration Utility is shipped with supported instruments. Supported instruments include the 4180 and 4181 Precision IR Calibrators.This software is free and does not require a serial number to be installed.Size: 13.9MB

IO Toolkit v1.0 (.exe)IO Toolkit (Model 9940)IO Toolkit v1.0Posted: 09/26/2008Description: The IO Toolkit is shipped with supported instruments. This version includes support for the new 1523 and 1524 series Readouts.This software is free and does not require a serial number to be installed.Size: 7.0MB

Interface-it v3.81 (.exe)Interface-it Temperature Calibration SoftwarePosted: 11/27/2007Description: This version includes drivers for the new 914x series Field Metrology Wells as well as 917x series Metrology Wells.Size: 2.2MB** INTERFACE-IT MAY NOT BE FULLY COMPATIBLE WITH WINDOWS® VISTA  & WINDOWS® 7 **Fluke Calibrations's Interface-it Software Version 3.81 allows nearly all our dry-wells, baths and controllers that are equipped with an RS-232 interface to be controlled remotely from a...

Hot Fix: MET/TEAM version 3.0.0 Hot Fix (.zip)Documents:MET/TEAM version 3.0.0 Hot Fix Readme (.pdf)Current MET/TEAM Customers:The MET/TEAM 3.0.0 Hot Fix release is an update to previous MET/TEAM software. This update includes bug fixes only.This download does not include an installer. The included files must be manually copied to the appropriate locations on your MET/TEAM server.Do not uninstall MET/TEAM 3.0.0.Follow the instructions in the MET/TEAM 3.0.0 Hot Fix readme file to install this update.New...

Hot Fix: MET/TEAM version 2.3.0 Hot Fix 2 (.zip)This Hot Fix is to resolve an issue that causes failures to save MET/CAL results data when using Windows Authentication. If you do not use Windows Authentication, this is not a necessary update.Current MET/TEAM Customers:The MET/TEAM 2.3.0 Hot Fix 2 release is an update to previous MET/TEAM software. This update includes bug fixes only.This download does not include an installer. The included files must be manually copied to the appropriate locations...

Hot Fix: MET/CAL version 10.2.2 Hot Fix (.zip)Documents:MET/CAL version 10.2.2 Hot Fix Readme (.pdf)This hot fix applies to both MET/TEAM and MET/CONNECT versions of MET/CAL.Current MET/CAL Customers:The MET/CAL 10.2.2 Hot Fix release is an update to previous MET/CAL software. This update includes bug fixes only.This download does not include an installer. The included files must be manually copied to the appropriate locations on each MET/CAL Client PC.Do not uninstall MET/CAL 10.2.2.Follow the instructions...

FlukeView® Forms Demo/Reader Software Downloads (.exe)You can download the free Demo/Reader version of FlukeView® Forms from this page. It allows you to open any FlukeView® Forms file and view or edit data that has been saved by a FlukeView® Forms user. It also allows you to see how data can be displayed, formatted, printed and saved in FlukeView® Forms.This demonstration software does not include the FlukeView® Forms Designer, which allows you to customize your forms.System Requirements for...

Download COMPASS® for PressureVersion 3 Releases3.00.43 (SP1) (2011.02.11)ADDCP-802Support PG7000 and PG9000 models that respond with FLUKE as the manufacturer.CHGCP-793An automated PG7000/PG9000 system with a PPC and AMH will use ATM as the minimum pressure when exercising in a test that is run in Absolute by ATM.3.00.42 (SP1) (2010.07.07)ADDCP-689Support alternate units of measure and temperature references for the Piston Cylinder effective area.ADDCP-775Added new instruments to the default database.CHGCP-786When...

CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

6270A Embedded Software, Update by USB (.zip)Additional Downloads:6270 PCM v104 USB (.zip)Click here to update by serial RS-232 port.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 6270AUpdating the PCM (Pressure...

6270A Embedded Software, Update by Serial RS-232 Port (.zip)Click here to update by USB.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the RS-232 serial port on the rear panel of the 6270AThe below procedure updates the main firmware. Updating...

If you are purchasing a calibrator to calibrate pressure measurement devices, follow these 2 simple steps to ensure you get what you need.

See why Roger Pineche, Director of Engineering at Fluke, says the new 8588A and 8558A are the best benchtop multimeters in terms of stability & accuracy.

There are a few instruments used to perform infrared (IR) thermometer and IR imager calibration. These instruments fall into two categories, cavities and flat-plates. To calculate the uncertainty in using these instruments, the temperature uniformity must be known. This is especially true with flat-plates. This uncertainty may be given in an instrument’s specification. However, there is not a standardized test method to test the uniformity of a flat-plate calibrator as there is with other classes...

Seiring bertambahnya usia array PV, ada banyak faktor potensial yang dapat menyebabkan penurunan kinerja sistem. Beberapa mungkin sudah diperkirakan, seperti penurunan performa akibat kotoran atau degradasi array jangka panjang. Namun, beberapa penyebab lainnya mungkin tidak terduga, seperti kerusakan dioda bypass, retakan pada modul, dan sebagainya. Penggambar kurva I-V memiliki kemampuan unik untuk mengidentifikasi gejala penurunan kinerja pada sistem PV. Alat ini bekerja dengan cara menangkap...

Anda harus mengetahui bidang iradiasi array dan suhu sel surya untuk mengevaluasi kinerja rangkaian PV, apa pun metode pengujiannya. Untuk memastikan Anda dapat menginterpretasikan kurva I-V Anda dengan akurat, perhatikan kondisi lingkungan, karena perubahan cepat dalam iradiasi atau suhu sel surya dapat menyebabkan kesalahan pada pengujian kurva I-V Anda. Jenis sensor dan metode pengujian yang tepat, seperti perunut kurva I-V Fluke Solmetric PVA 1500, harus digunakan untuk memperoleh hasil yang...

Untuk menganalisis kurva I-V dalam sistem fotovoltaik, gunakan perunut kurva I-V untuk membandingkan kurva terukur dengan kurva standar atau yang diprediksi, dengan mempertimbangkan pengaruh lingkungan seperti bayangan atau suhu. "Flowchart Penyelesaian Masalah Array PV" merupakan panduan komprehensif yang dikembangkan berdasarkan pengalaman lapangan ekstensif, tinjauan literatur terkait keandalan modul PV, dan masukan dari para pakar di National Renewable Energy Laboratory (NREL). Perunut Kurva...

Conveyor maintenance must be efficient to avoid expensive, unplanned downtime. This is particularly important in industries like food and beverage production, logistics warehousing, automotive manufacturing, mining, and raw material handling. The Fluke ii910 Precision Acoustic Imager with MecQ™ Mode provides a modern solution. It can detect potential problems in conveyor systems before they worsen. This allows maintenance teams to take proactive steps and maximize system performance. Fluke MecQ™...

Kit aksesori kabel pengujian khusus untuk digunakan dalam pemecahan masalah dan penelusuran pada kabel dan sirkuit.

Pelajari semua mengenai kamera pencitraan termal untuk pemeriksaan rumah dan bangunan. Temukan pencitra termal terbaik untuk HVAC.

Alat yang penting untuk memasang, memantau, dan menguji sistem fotovoltaik adalah Fluke 393 FC solar clamp meter. Berkat rating CAT III 1500 V/CAT IV 600 V untuk lingkungan CAT III, alat ini cocok dengan berbagai pekerjaan, termasuk instalasi tenaga surya.

Siapa penemu multimeter? Dari galvanometer dan voltmeter hingga multimeter digital dengan fungsi pencitraan termal dan nirkabel. Sejarah model multimeter Fluke.

Pengujian dan pemantauan partial discharge menggunakan Fluke ii910 acoustic imaging camera. Ketahui cara melakukan prosedur pengujian partial discharge.

Definisi partial discharge. Pelajari proses terjadi dan penyebab partial discharge serta dan 4 jenis utamanya.

Maksimalkan kinerja alat pneumatik Anda dengan Fluke ii900 Acoustic Imaging Camera. Cara praktis memeriksa penurunan tekanan dan masalah aliran udara dalam saluran udara bertekanan.

Ketahui cara mendiagnosis masalah kualitas daya dalam sistem elektrikal lama menggunakan multimeter dan osiloskop Fluke.

Lihat perbedaan spesifikasi dan fungsionalitas antara Kamera Pencitraan Akustik Fluke ii900 vs ii910.

Kit Adaptor Konektor Industri Fluke Networks

Remote ID Pengganti Fluke Networks #1 / Wiremapper untuk LinkIQ™

Dengan antarmuka sederhana, menu 3 tombol pada layar (dalam 6 bahasa) termometer laser digital Fluke 568 dan 566 mempermudah bahkan pengukuran yang kompleks.

Fluke 381 melakukan segalanya yang Anda harapkan dari clamp meter, dan memungkinkan Anda untuk menghapus layar dengan lebih fleksibel.

Fluke 724: adalah semua yang Anda perlukan untuk memecahkan masalah dan mengalibrasi suhu.

A high performance, 320 x 240 infrared camera. Perfect for maintenance professionals due to its high-end features including wireless & LaserSharp™ auto focus.

Fluke Ti300 comes complete with LaserSharp® Auto Focus and a rugged design, built to last in any environment. Stay on the cutting edge with this Fluke infrared camera.

CV300 infrared window – less than 5 minute install and grounding, torture tested with quick-turn or security keyed access.

Fluke CNX 3000 Wireless Test Tools show real-time measurements from remote modules up to 20 meters away. Simultaneous readings on a single screen.

FlukeView software adds PC power to your Fluke ScopeMeter test tool

The i3000s Flex is an ac current clamp utilizing the Rogowski principle. It can be used to measure currents up to 3000 A when used in conjunction with oscilloscopes, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.

Perangkat Lunak Aplikasi PowerLog Classic Perangkat lunak aplikasi PowerLog Classic yang digunakan dengan Fluke 345, VR1710, 1735, dan 433/434/435. (Kompatibel dengan Windows Vista, 7, 8, dan 10). Perangkat Lunak Firmware Updater (.exe) Firmware Upgrade Instructions (.doc) Versi Firmware terbaru: Firmware pada instrumen ini dapat diperiksa menggunakan langkah-langkah ini: Tekan tombol Menu, pilih Pengaturan Instrumen menggunakan tombol kursor, tekan Enter, pilih Versi dan Kalibrasi menggunakan tombol...

Fluke Energy Analyze Plus Perangkat Lunak Aplikasi Fluke Energy Analyze Plus untuk mengunduh, menganalisis, dan melaporkan. Digunakan bersama Fluke 1730, 1732, 1734, 1736, 1738, 1742, 1746, dan 1748. File Firmware Fluke 173x v2.4.1 (.bin) Prosedur pembaruan sesuai dengan revisi firmware yang saat ini diinstal di instrumen. Untuk memperbarui firmware revisi 2.0 yang berjalan di instrumen, simpan file biner ke direktori “Fluke173x” Untuk memperbarui firmware yang berjalan di instrumen 1736 sebelum...

Perangkat Lunak Aplikasi PowerLog Classic untuk Fluke VR1710 (.exe) Perangkat lunak aplikasi PowerLog Classic untuk digunakan dengan Fluke 345, VR1710, 1735, dan 433/434/435. (Kompatibel dengan Windows Vista, 7, 8, dan 10). (01/2016) Alat Peningkatan Firmware VR1710 vA1.34(.zip) (12/2016)

Perangkat Lunak Aplikasi PowerLog Classic Perangkat lunak aplikasi PowerLog Classic yang digunakan dengan Fluke 345, VR1710, 1735, dan 433/434/435. (Kompatibel dengan Windows Vista, 7, 8, dan 10). Alat Upgrade Firmware 1735 v3.1 (.exe) Upgrade versi firmware Fluke 1735 ke versi terbaru. (Kompatibel dengan Vista) 1735 Firmware v1.10 (.zip) File ini harus di-unzip dan digunakan bersamaan dengan firmware upgrade tools V3.1 (atas). Terakhir diperbarui 08/2014 CATATAN: Firmware v1.10 memerlukan PowerLog...

Fluke 805 Vibration Meter Firmware v3.0.5 (.bin) Buat grup aset, aset, titik pengujian secara cepat menggunakan Templat Impor di Aplikasi Web Fluke Connect™ Masukkan perintah kerja dan rute ke 805 FC secara langsung menggunakan Aplikasi Seluler Fluke Connect™ Siapkan dan edit profil mesin menggunakan Aplikasi Seluler Fluke Connect dan memasukkannya ke 805 FC Hubungkan hasil pengujian dengan profil mesin secara otomatis Untuk meningkatkan versi Alat Ukur: Download file upgrade untuk Alat Ukur...

Vibration Software Downloads