Fluke T5-600 Continuity, Current and Voltage Tester
Fluke T5-600 Electrical Tester is rated out of 5 by 54.
Key features
Designed for residential, commercial and industrial electricians it is the best frontline troubleshooting tool.
- Automatically measure AC and DC voltage up to 600 V with precise digital resolution
- Measure current up to 100 A without breaking the circuit with OpenJaw™ design
- Troubleshoot resistance problems up to 1000 Ω
- Work in tight spaces with detachable Slim Reach probe tips
Product overview: Fluke T5-600 Continuity, Current and Voltage Tester
The T5-600 is a versatile troubleshooting tool to carry to every job site.
It is a voltage tester, a continuity tester and a current tester in one compact tool. Just select volts, ohms, or current and the tester does the rest. For higher voltage applications check out the Fluke T5-1000.
Automatically measure AC and DC voltage up to 600 V with precise digital resolution
- Auto-selects between AC and DC voltage
- Suitable for residential or commercial applications
Measure current up to 100 A without breaking the circuit with OpenJaw™ design
- OpenJaw™ design allows for fast and easy current measurement
- Measure current more safely without metallic contact
Troubleshoot resistance problems up to 1000 Ω
- Measure resistance when troubleshooting motors, HVAC systems or electrical systems
- Built-in continuity beeper provides fast and easy go/no-go tests
Work in tight spaces with detachable Slim Reach probe tips
- This continuity tester features a compact design with handy probe storage, easily fits in one hand
- The test lead slot in the back makes the meter an “extended handle” for the probe, leaving the other hand free to place the second lead
- Test leads accept Fluke accessory test clips
Key safety features
- Protected to EN61010-1 CAT III 600 V rating
- Integrated protection circuit allows it to stay connected to a voltage source longer than a solenoid tester
- UL and CSA approved
Additional product features
- Withstands a 10 ft. (3 m) drop
- Offers Auto-off mode to conserve battery life
- This voltage tester fits into an optional holster that attaches to a belt and neatly stows test leads
What's in the box:
- 600 V Voltage, continuity and current tester
- 4 mm detachable probes
- Quick Reference Guide
Specifications: Fluke T5-600 Continuity, Current and Voltage Tester
| Specifications | ||
| Jaw opening | 12.9 mm (0.5 in) | |
| Max wire size | 1/0 THHN Cable | |
| Current range AC rms | 0 to 100.0 A | |
| Accuracy AC current (50/60 Hz) | 3% ± 3 counts | |
| AC response | Averaging | |
| Voltage range AC/DC | 0 to 600 V | |
| Voltage accuracy | AC | 1.5% ± 2 counts |
| DC | 1% ± 1 count | |
| Resistance range | 0 to 1000 Ω | |
| Continuity beeper threshold | On at < 25 Ω, off at > 400 Ω | |
| Volts indicator LED threshold | Guaranteed on by 30 V AC | |
| Environmental Specifications | ||
| Operating temperature | -10°C to 50°C | |
| Storage temperature | -30°C to 60°C | |
| Humidity (without condensation) | 0% to 95% (5°C to 30°C); 0% to 75% (30°C to 40°C); 0% to 45% (40°C to 50°C) | |
| Dust/water resistance | Yes | |
| Operating altitude | 2000 meters max | |
| Temperature coefficient | 0.1 x (specified accuracy)/°C (< 18°C or > 28°C) | |
| Safety Specifications | ||
| Measurement Category | IEC 61010-2-032, IEC61010-2-033: CAT III 600 V, 100 A ac | |
| Agency approvals | CSA, TUV | |
| Maximum voltage | 600 V between any terminal and earth ground | |
| Mechanical and General Specifications | ||
| Size | 30.5 x 51 x 203 mm | |
| Weight | 300 g | |
| Warranty | Two-years | |
| Battery life | 200 hour zinc chloride, 400 hour alkaline | |
| Battery type | 2 x AA | |
| Low battery indicator | Yes | |
| Current sensor opening | 12.9 mm | |
Models: Fluke T5-600 Continuity, Current and Voltage Tester
Fluke T5-600
Fluke T5-600 Voltage, Continuity and Current Tester
Includes:
- 600 V Voltage, continuity and current tester
- 4 mm detachable probes
- Instruction sheet
Rated 5 out of 5 by Add2122 from great features I simply love fluke tools one of the best in market
Date published: 2020-10-07
Rated 5 out of 5 by Big Lew from Nice for reading Amps T5-600 is Great. Question will it work AC Line Splitter example Tekpower M920 AC Line Splitter, does Fluke have a unit that will work with the T5-600
Date published: 2019-10-27
Rated 4 out of 5 by beanhead88 from great limited range tester for everyday functions I brought mine in 2006 so its about 13 yrs old, and its seen and been through it all and theres been no real issues! My only complaint (and id be glad to be corrected) is that you cant mesure amps between A+N with the test probes to see what an outlet cct may be drawing. But for the price and ease of use, and the probe holder on the meter (which is a great function imo) its a good little all rounder!
Date published: 2019-10-06
Rated 5 out of 5 by Ninmmkmfdm from Safety first I bought this my first year as an apprentice and now in my 3rd year still great.
Date published: 2019-07-08
Rated 4 out of 5 by Tnjack from Great value. A few shortcomings. This is my second t5-600.
Love the light weight, multiple features (Amp clamp, vom).
Higher resistance reading would be a plus, but I realize that Fluke doesn't want to eat into the market for it's other meters.
My large Fluke meter has a lighted display. That would be awesome on the T5.
Be warned: My old meter did not have detachable leads.
I don't feel that feature is needed with this type of meter.
If you put one of your probes in the socket in the back so you can test while holding the meter, it is very easy to get the probes in there so deep that once you try to remove them, they come unplugged from the leads.
Mine would come unplugged every time.
I called Fluke tech support and the tech got a T5 and was quickly able to recreate the problem.
His solution: Try not to wedge them in too tight.
:-(
My solution:
(super glue doesn't work)
If you wrap a piece of electrical tape around plug where the lead connects, it makes it difficult to attach the probe, but it will stop coming apart each time you are finished using the meter.
Come on Fluke, you make world class products.
You can make this meter better.
Date published: 2017-09-11
Rated 5 out of 5 by Tibby from Light Them Up I sure wish the voltage reading would light up in dark places.
It is hard to check voltages,for example in cealings.LED light sure would
be helpfull.
Date published: 2017-08-12
Rated 5 out of 5 by msdhoff from Money well spent! I bought this tester and it was money well spent. I don't think I will have reason to buy another tester for a long time. The settings are easy to use. I love troubleshooting with this tool. Thank you Fluke for an excellent product!
Date published: 2016-12-16
Rated 5 out of 5 by Paddy from Easy To Use I work in noisy environments & put the meter up to my ear like a phone when I'm checking continuity. This meter is compact, lightweight & durable.
Date published: 2016-12-15
Rated 5 out of 5 by jmartin from Great Product!!! We purchased this tester a few months back and it works great. After the first purchase, we ended up buying one for everyone in the department.
Date published: 2016-12-12
Rated 4 out of 5 by pwj9 from overall a good rugged tester Have been using this tester for several months and works great for ac/dc voltages and testing continuity. I would give it 5 stars if the tester could read higher resistance values. When I work on fire alarm systems, they use resistors up to 15k ohms.
Date published: 2016-12-11
Rated 5 out of 5 by MarkM from Great and simple to use I purchased the T5-600 to do annual checkups on my HVAC system. The current measuring capability of the T5-600 works great for measuring the compressor and fan motor currents. The open jaw head is compact and makes measurements a breeze. The unit is compact, rugged, and simple to use. Great for the professional or DIY homeowner.
Date published: 2016-12-10
Rated 4 out of 5 by ROBOguy from Quality for what you pay. I bought this item last year and it has been quite a simple troubleshooting tool for me in the automated packaging industry.
My only complaint would be that the leads that the meter comes with are quite large and make reading small terminal voltages a little tricky.
I do like the built in "Forks" for current readings so I don't have to carry a traditional clamp attachment for AC current readings when I travel.
Date published: 2016-12-09
Rated 5 out of 5 by techniman11 from Compact and Versatile I purchased this a few months ago to use at my work. The Fluke T5-600 is perfectly suited for my needs. Firstly, it's slim case design is convenient for carrying around in a pocket. The open jaw feature, combined with the slim profile, is another reason I chose this model. It makes it simple and easy to get Amp readings in tight spaces. The single dial is easily set and it is auto sensing for AC/DC. When you're troubleshooting in a time-critical situation (which is most of the time). it's great to be able to set the device and start taking readings. The probe wires are connected to the device internally. The probes are removable for replacement, and they are conveniently stored in slots on the rear of the case. There is a feature that allows you to place one probe in a slot in the top of the case, thus making a voltage reading more convenient. It is a very rugged, accurate, and easy to carry and use tester. If I had one con, it would be that it doesn't have a backlit display. I have used the Fluke meters from the beginning, and I currently own other Fluke devices.
Date published: 2016-12-09
Rated 5 out of 5 by Ampdraw from Absolute Must Have As a professional service technician and HVAC/R Instructor I own several Fluke instruments, the T5-600 however is one that no matter where I am it's always in reach. I keep one in my work van, one in the glove box of my car and one in the kitchen drawer. It's inexpensive, insanely durable and has absolutely zero for a learning curve to use it. From professional technicians to the Do It Yourself homeowner this is one must have meter everyone should have within reach!
Date published: 2016-12-09
Rated 5 out of 5 by steppenwolf from great design I purchased this tester about fifteen years ago. As a commercial food equipment service technician I found this tester to be my most important tool. The open jaw design made getting in tight spaces much easier than a clamp meter.By far the best meter I have ever owned.
Date published: 2016-12-08
Rated 5 out of 5 by JustinZ94 from Electrician must have While working in the electrical field I have ran across numerous of people that owned the 601l0-1000V versions of this meter, I have seen nothing but great feedback from The owners. So I decided that I was going to get one. Got one got the case and accessories for it and couldn't be happier. Excellent product true results not too hard to understand how to work either. Absolutely love it
Date published: 2016-12-08
Rated 5 out of 5 by agrgz from Ease of Use and Durable I bought this electrical tester about 2 years ago. Being in the construction industry, having tough tools and meters is critical. After 2 years, at numerous jobsites and extreme conditions, I can personally say this is one of the easiest tools to use/carry, and incredible reliable (automatic selection of AC/DC is a great feature). almost 3 years in and I didnt even need to change the battery!
Date published: 2016-12-08
Rated 5 out of 5 by Derek from My GoTo Tester!! Excellent Tool! 27 years in the Trade and I can't remember when I bought my first one! I wasn't so sure when this came out as I was a "wiggy" user back in the day however, having the ability to test voltage and current in one tool was pretty cool. I will never buy another tester for my bags unless Fluke can outdo this one! I supply my Electricians with this tester as well. I have never had any issues with any of the ones I've owned, the batteries last FOREVER, it's versatile and accurate enough for the smaller jobs. The automatic AC/DC distinction feature is excellent for troubleshooting! Stop reading the reviews and go buy this tester!
Date published: 2016-12-08
Rated 5 out of 5 by Tom883 from My "Go to and First Responder Tool" Fluke instruments were provided by the utility company I worked for before retirement; therefore, I knew how good ,rugged, and reliable they were. It was an easy decision to make when choosing a tester for my own use at home.
Date published: 2016-12-08
Rated 5 out of 5 by Mouse from Have purchased 4 of these through the years I bought one of these meters for myself years ago. Liked the fact that you could measure amps without having to hook up different leads or have to clamp on the big clamps and the tone notification on the continuity side. As I moved from to different jobs this is one of the first purchases that I made for the new company. When I would be out troubleshooting at a customers location the customers would see me using this meter and want to know about it. Don't know how many went and purchased one, but sure showed it off to a lot of people.
Date published: 2016-12-08
Rated 5 out of 5 by LM70 from More than I had hoped for! Just recently purchased the T5-600 Electrical Tester a couple weeks ago and am very impressed with it's features. While the feature set is a bit limited, it does everything I need and more. I'm particularly impressed with way you can surround a conductor to take a current measurement without actually clamping on. I bought it to map out the current draws on all the circuits in my main panel as well as a sub panel which it accomplished easily. Have also used it to take voltage and resistance readings and it seems to work well for these also. Love the shorter test leads also.
Date published: 2016-12-07
Rated 4 out of 5 by Rusty Shackelford from Good Frontline meter I'm an HVAC service tech, and this meter has been a permanent fixture in my main tool bag for years. Good size meter, great for hitting the basics. This model has been around for a while now. Wouldn't mind seeing a refresh with removable leads and a backlight.
Date published: 2016-12-07
Rated 5 out of 5 by Paulie from light weight easy to carry around in the tool bag. I've had this for a little bit and it works great! its light weight and easy to carry around
I would recommend this tool.
Date published: 2016-12-07
Rated 5 out of 5 by Brody14 from Excellent Tester I've had this over a year and its been nothing but good results. Working in industrial Maint it helps to have a very portable piece of equipment (that WORKS!) to go from job to job without the hassle of caring a big tester for small equipment.
Date published: 2016-12-07
Rated 5 out of 5 by pjenn from Excellent product This has become the standard replacement for the old solenoid style testers. Used with the holster, it fits well on your belt.
Date published: 2016-12-07
Rated 5 out of 5 by dropkick from execellent tester my t5600 electrical tester is 17 years old and still works fine it gives good results it even measures dc amps the only thing it doesn't do is talk thanks vince
Date published: 2015-11-30
Rated 2 out of 5 by Mohrpwer from Intermittent continuity loose fitting test leads I wanted to buy a rugged tester what i ended up with was a tester that has trouble makeing continuity tests and whose lead heads pop off the wire when i lightly pull them from the molded back. Its obvious that the probes way too lose but i have no way to fix that. Ohm readings are inaccurate. I read 51 ohms on a 25 watt 120volt light bulb. Overall im verry disappointed. To add insult to injury the serial number was affixed wrong and half pealing off i had to cut back tge lip of the sticker so the whole thing would not peel off.
Date published: 2015-10-26
Rated 2 out of 5 by peppy from mixed up leads! bought a month ago, came with one tp1 flat lead and one non-flat lead! cant test a recept! Saw same t5 600 in sears; has both sets in package! two tp1 flat leads and two regular leads. Wish I had bought that one; was the same price and the one I purchased! Not happy.
Date published: 2015-09-10